Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Does anybody see my chuck key?

Posts

Does anybody see my chuck key?

#1

Does anybody see my chuck key?

Mike Schwing from Md.

>Dam**t! I finally get to do some turning and my chuck key totally disappears on me half way through roughing a load of walnut. It has to be in there somewhere. Guess I'll have to sweep earlier than planned. Argh. Argh.


img

Re: Does anybody see my chuck key?

#2

Re: Does anybody see my chuck key?

Paul in Phoenix, AZ

>Man that looks like fun! I bought a big magnet on a poll (I think from Harbor Freight) a couple of years ago because I got tired of digging through wood chips to find the metal parts I had dropped. It sure comes in handy every now and then.

Good luck, Mike.

~Paul

Re: Does anybody see my chuck key?

#3

Re: Does anybody see my chuck key?

Thomas Skaggs, Foothills of Mount Level

>I see it. It's about 20 inches from the front right leg of the lathe. No...a little farther to the right. Now come closer to your shoe...that's it! Oops, sorry, that was your live center...sorry. ;-)

Tommy

Re: Does anybody see my chuck key?

#4

Re: Does anybody see my chuck key?

Lan Brady

>LOL, anyone that builds a vapor barrier around the lathe is bound to have 2 chuck keys!

Actually agreat idea with the palstic wall! I make a giant mess, then compressed air and then vacuum.

Thanks for the smile, Lan

Re: Does anybody see my chuck key?

#5

I don't know about you...

Raymond Overman in SC

>but I've always found the best place to keep it is in the chuck. That way it's in the wall or ceiling next time you need it and not under that pile of shavings. (Disclaimer: this is not the best place to keep your chuck key.)

I'd quit worrying about the chuck key though until you learn not to turn away all the wood into shavings. Where's the toothpick that came out of all that?

Just joking and picking a little. Good to see you're turning some and good luck with your quest for the key!

Re: Does anybody see my chuck key?

#6

Re: I don't know about you...

Mike Schwing from Md.

>Heh, its still in there somewhere! That pile of shavings came from 6 bowl and platter roughs, 12-16" wide.

I think I need to put a 2nd chuck key on my Christmas list, so then I'll have twice as good a chance at finding them when I lose both.

Re: Does anybody see my chuck key?

#7

Re: I don't know about you...

David Breth

>C'mon, Mike. Just stick a dime in the chuck and turn it really, really, really hard with your fingers.

Re: Does anybody see my chuck key?

#8

Re: I don't know about you...

Raymond Overman in SC

>Will a penny work? I don't know that I can afford to mess up a perfectly good dime.

Re: Does anybody see my chuck key?

#9

Re: Does anybody see my chuck key?

Phil Powell

>Mike,

While you're down there looking be gentle and if you can find

my damn glasses!

Re: Does anybody see my chuck key?

#10

Re: I don't know about you...

David Breth

>Whooops! I saw Mike's post and convinced myself he lost his key. Sorry about that Raymond!

Re: Does anybody see my chuck key?

#11

No Chuck Key, Just your shag rug..LOL

Gerry in Maryland

>

Re: Does anybody see my chuck key?

#12

Re: I don't know about you...

David Breth

>Wait a minute! Mike DID start this post. Man. I'm messed up. Must be the day - went to bed last night watching the first snowstorm of the year, woke up this morning and spent two hours clearing two feet of snow out of the driveway. THEN the plow came by. Didn't see any chuck keys though. I'll let you know in June.

Re: Does anybody see my chuck key?

#13

Re: Does anybody see my chuck key?

Jennifer@Indy.USA

>Nope....but I sure am glad to know you're back home and enjoying some turning! At least you were :)

Jen

Re: Does anybody see my chuck key?

#14

Re: Does anybody see my chuck key?

Mike Schwing from Md.

>Well that whole mess is cleaned up and know what? (of course you do), I didn't find the damned thing, nor did I find your glasses. Oh well, my window to turn is gone anyway...

Re: Does anybody see my chuck key?

#15

Re: Does anybody see my chuck key?

JKJ in East TN

>I used a magnet just the other night to find an allen wrench and screw that tried to escape under 3" of shavings.

JKJ

Re: Does anybody see my chuck key?

#16

Re: Does anybody see my chuck key?

David Breth

>Mike -

I know this isn't something you would ordinarily do in your shop, but walk around in bare feet for a couple of minutes. You'll find it for sure.

Re: Does anybody see my chuck key?

#17

if not found by now...

Ken Grunke from SW WI

>then it's either inside the lathe bed, or you absent-mindly carried it into the house and put it down on the kitchen counter next to the coffee maker. Or sumptin' like that.

Re: Does anybody see my chuck key?

#18

It's with Waldo, now find Waldo....

Ed Kelle

>

Re: Does anybody see my chuck key?

#19

Re: if not found by now...

Lan Brady

>Not much help at this point, but I purchased an item from Harbor Freight called a magnetic chuck. It is just a magnet that sticks to both sides. It is great for sticking on the side of a lathe and holding chuck keys, washers, allen wrenches, etc. I actually have one at both ends of my lathe.

Lan

Re: Does anybody see my chuck key?

#20

Ellis Walentine

Chuck key's in love...

Ellis Walentine

>...and by now she's eloped with the walnut fairy. :-)

A giant magnet might be in order, Mike.

Ellis

Re: Does anybody see my chuck key?

#21

Beep Beep Beep

Jim Shaver - Oakville, Ontario

>Too Funny Mike,

Sometimes I drop a pen bushing in a big pile of shavings...I have a wand metal detector...works every time!

take care,

Jim

Re: Does anybody see my chuck key?

#22

Re: Beep Beep Beep

JimQ

>Tie a string on it and tie it to the lathe, No, that wont work, for long, it would just let the pile get deeper.

JimQ

Re: Does anybody see my chuck key?

#23

I don't even see the chuck itself !

Bruce Wiseman

>

Re: Does anybody see my chuck key?

#24

Then you can.......

Barry Irby

>use a hunk of metal to look for the magnet.

Re: Does anybody see my chuck key?

#25

Re: Does anybody see my chuck key?

Barry Irby

>Now that I have a DC and clean up more often, I had to lower my lathe and get a soft rubber pad to save my knees. Get a second chuck key, it's cheaper.