Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

I was talking to Dr. Penner about turning today.

Posts

I was talking to Dr. Penner about turning today.

#1

I was talking to Dr. Penner about turning today.

Dave Smith, Longview, WA

>I was talking to Dr. Penner about turning this afternoon.

Dr. Penner: "What happened."

"I was cutting turning blanks on the band saw and I tried to cut my wedding ring off. I missed and cut the back of the ring finger. Only nicked the ring."

Dr. Penner, "I hate it when that happens."

"I was cutting up some fresh silktree I got last Friday. I hope there are no slugs in the wound."

Dr. Penner, "After we deaden the finger we will look for slugs. You will feel some stinging as I inject the Novocaine."

"Congratulations Dr., you just made the finger hurt more than the saw blade did."

Dr. Penner, "Before I started woodworking and turning we cut down a figured bigleaf maple tree and chopped it into firewood. Now I wish I hadn't done that."

"Yeah, I hate it when that happens."

Dave Smith

And I thought cutting my finger was bad in Longview, WA.

Re: I was talking to Dr. Penner about turning today.

#2

Re: I was talking to Dr. Penner about turning toda

Carole in VA

>Slugs? In the wound? Eeeew! Does your wife know you tried to cut off your wedding band? ;) There are less painful ways, you know. So how many stitches did Dr. Penner end up decorating you with? Hope you heal quickly.

Re: I was talking to Dr. Penner about turning today.

#3

The answer is 5.

Dave Smith, Longview, WA

>

Re: I was talking to Dr. Penner about turning today.

#4

Re: The good side

tek-Brunswick, Ohio

>It's like when I got 5 stitches from a circular saw, You do it once and you know you never want to do it again! It also makes you more carefull! Three of my stitches were in my left ring finger and two in the little finger. The problem with saw cuts is there is a trench of missing flesh between the two sides of the wound. They have to pull the stitches tight make up for what is missing. The end of my ring finger still gets numb whenever it starts to get cold and I got that cut about 20 years ago.I hope you heal fast and well! Be safe.

Tom

Re: I was talking to Dr. Penner about turning today.

#5

Use a metal cutting blade for rings......

TD

>Flesh cutting blades should not be used in a turning shop! :-)

Re: I was talking to Dr. Penner about turning today.

#6

Re: The good side

JKJ in East TN

>>The problem with saw cuts is there is a

>trench of missing flesh ...I got that cut

>about 20 years ago.

I learned that lesson nearly 40 years ago. On a huge bandsaw at Berea woodcraft industries (they told me it had a 20' blade but size doesn't matter) I managed to reshape my thumb with a nice little trench. Too shallow for stitches, I can still see the landscape change on the tip. I learned I didn't want to do that again. Fortunately, it doesn't hurt now, unlike a 20-year-old stingray stab on my little finger.

BTW, I did get a minor injury from a bandsaw blade recently - while uncoiling a blade! There is a good reason they say to use safety glasses - the blade got away from me and put a line of stab wounds on my forehead. Now I wear a full face shield instead of safety glasses.

I'm glad to see these injury posts. It gives me another reminder to think carefully before every move.

JKJ

Re: I was talking to Dr. Penner about turning today.

#7

Wood Gods payback for Dog Bowl Comment?

Charlie Anderson

>That comment is similar to one of my friend's comments who calls Mike Schwing's work spitoons.

Re: I was talking to Dr. Penner about turning today.

#8

Re: I was talking to Dr. Penner about turning toda

David Breth

>Glad it was no worse than it was. I'll bet you noticed that gold is an excellent conductor of heat though.

I met a turner at a craft show a couple of weeks ago. I didn't need to see the turnings to know that was his craft. One look at that one anciently-mangled finger of his was a dead giveaway.

Re: I was talking to Dr. Penner about turning today.

#9

Re: Ring

Mark Mandell - Gone Round In Jersey

>Dave,

There are other ways to remove a wedding ring that don't involve power tools and don't leave visable scars.

[heal quickly]

M

Re: I was talking to Dr. Penner about turning today.

#10

Uncoiling blades

Brian Hahn in SW Wisconsin

>I always throw mine on the shop floor and watch them dance from a safe distance. They get their revenge by trying to bite me when I put them on the saw.

Re: I was talking to Dr. Penner about turning today.

#11

Re: Uncoiling blades

Barry Irby

>I thought I was the only person doing that. Actually, I have a concrete floor in my shop, so I take them outside and throw them in the grass.

Re: I was talking to Dr. Penner about turning today.

#12

Me, too

Scott Hurley in N. VA

>Just let it fly - it's nowhere near you and does the trick nicely.

Re: I was talking to Dr. Penner about turning today.

#13

Re: I was talking to Dr. Penner about turning toda

Ed Karch in No.VA

>Dave

I hope you didn't get a tendon. I sawed the index and middle of right hand with a dull band saw blade. The ER missed a tendon in the index and I had to get reconnected later. When I point West it is actually pointing SW but still works holding a gouge. Band saws will eat you.

Re: I was talking to Dr. Penner about turning today.

#14

Re: I was talking to Dr. Penner about turning toda

gary s clarke

>number of stitches doesn't mean a thing, how many stitches in a button hole? :)

Re: I was talking to Dr. Penner about turning today.

#15

Keith Tompkins

Re: Ring

Keith Tompkins

>Mark, does it involve large amounts of cash and a new place to live? LOL

Re: I was talking to Dr. Penner about turning today.

#16

Exactly what I was thinking.

Dave Smith, Longview, WA

>

Re: I was talking to Dr. Penner about turning today.

#17

Thank you for your concern.

Dave Smith, Longview, WA

>Finger is doing fine. No tendon damage and very little pain. Dull blades will get you into trouble. I have 5 stitches to prove it.

Dave Smith

Finger OK, forehead is sore in Longview, WA.

Re: I was talking to Dr. Penner about turning today.

#18

Re: I was talking to Dr. Penner about turning toda

JimQ

>Sounds familiar. I have had people ask me if I still have a table saw when they look at my right hand. Had to have middle & ring fingers mostly reattached 7+ years ago.

JimQ