Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Corrugata Burl

Posts

Corrugata Burl

#1

Corrugata Burl

Chuck Ludwigsen

>Hi folks.

I have not posted much in quite a while, but have been turning. Mostly been busy doing both the newsletter and website for the Mid South Woodturner's Guild.

Here is a Corrugata Burl natural edge bowl I just completed Saturday. It measures about 7-1/2" across. Hope you like it. Any comments or suggestions for improvement are appreciated.

Chuck in Memphis, TN.


Re: Corrugata Burl

#2

Re: Corrugata Burl

Barry Turner

>Nice!

Re: Corrugata Burl

#3

Re: Corrugata Burl

William Duffield, on the Cohansey

>Corrugated paper? Cardboard? :^) Of course not.

Quercus corrugata, or Ridge Oak, from Central America, maybe?

Nice turning. It does justice to the tree.

I think I would like it better if it were thinner out towards the natural edges. Very little of the figure or the original shape of the burl would be lost by decreasing the thickness of the edge at the maximum diameter by almost half. Also, the curve between the bowl and the rim is very tight. I think it would "flow" better if the rim swept a bit more gradually into the bowl.

Re: Corrugata Burl

#4

JL

Re: Corrugata Burl

JL

>Real nice - whatever a Corrugata is. Maybe a touch thinner on the rim? The transition from the bowl to the rim is somewhat abrupt, but it works with the flow of the piece, particularly in the top pic.