Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

mentoring, turning club

Posts

mentoring, turning club

#1

mentoring, turning club

JKJ in East TN

>We discussed mentoring in our woodturning club meeting tonight. We want to develop a one-on-one mechanism where beginning turners can learn from those more experienced, and where experienced turners can trade specialized knowledge and learn new skills.

If you have experience with such a a program in your club,

- How is it implemented in your club?

- How well does it work?

- Any problems to watch for?

- Advice, things you might do differently?

JKJ

Re: mentoring, turning club

#2

Re: mentoring, turning club *LINK*

Bill Howatt

>Valley Woodturners located in Ottawa, Ontario has such a program. See link for more info.

Bill


Valley Woodturners Mentoring

Re: mentoring, turning club

#3

Keith Tompkins

Re: mentoring, turning club

Keith Tompkins

>HI John,

I have participated in two local clubs here in New York. One club, the Adirondack woodturners, has a meeting that starts one hour previous to the regular meeting. this is run by Paul Petrie, an expert turner. This early meeting caters primarily to newbies.

The other club, the Kattskill turners, has sessions that teaches new turners. They are run by the more experienced turners in the group. A session costs about seventy dollars, and covers basics such as sharpening, etc..

I think both of these approaches work well, as long as scheduling is not a problem.

Re: mentoring, turning club

#4

Re: mentoring, turning club

Bob Hackett

>The Maine Woodturners used to maintain a list of members who were willing to give lessons.For $25(payable to the club) any member could select from the list a person they wished to spend a half day with either at thier shop or ask the mentor to come to the paying member`s shop.The half day usually turned into at least a whole day.

The program was successful in not only providing a way for the newbies to get up to speed but it also helped build the club`s treasury.

Mainely,Bob

Re: mentoring, turning club

#5

Re: mentoring, turning club

Russell L. Babbitt Jr.

>Channel Islands Woodturners has members who mentor for no charge. We meet at either the mentors shop or the students. Our mentors are willing to spend whatever time it takes to get members up to speed. This way both mentors and students learn. We also have a group of mentors that assist at a local middle school supervising students in woodturning. This program is on its second year......

Re: mentoring, turning club

#6

Re: mentoring, turning club

Keith Bundy

>I am a mentor for our club (Ohio Valley Woodturners Guild). We have several mentors and mentoring is free. All a member has to do is call a mentor and schedule a time. All the mentors are good turners. For some reason though the program doesn't get used much.

Re: mentoring, turning club

#7

Re: mentoring, turning club doesn't get used much?

Carol Reed, the Router Lady, Dubuque

>Curious. I wonder if clubs that charge a bit get used more. There is the human curiosity that sometimes finds the 'free' syndrome intimidating. In other words, if I pay $25 will I have a better sense of what I am getting? Or, if the wideopenness of 'mentoring' means I need some sense of what it is that I need to know before I ask for mentoring?

Wonder if the clubs 'successfully' doing this have an opinion?

I ask because when I was pres of the SDFWA, we made the same offer. It was rarely used. Never did figure out why.

Re: mentoring, turning club

#8

liabilities?? when paying for service.

kevinT in T Bay

>I don't have the expertise that you folks have...not yet. But when I was thinking about getting the kids at the group home into something like this , the Insurance company wanted to terminate may policy....i.e liabilities etc... There is a plan available , but I can't afford yet another monthly bill. Question, will the mentor be covered if it is done out of their shop/ or would the newbie be covered, whether not this person is paying a fee or not.????

Re: mentoring, turning club

#9

Re: mentoring, turning club doesn't get used much?

Andy Blackwell

>Capital Area Woodturners has a mentoring program. It's no cost and usually held at the mentor's shop(studio for the artistic). Also have a skills enhancement program that meets twice a month so that anyone wanting to improve their skill or learn a new technique can get assistance from an experienced turner.

Re: mentoring, turning club

#10

Re: mentoring, turning club

Don O.

>The Adirondack Woodturners have started a "Big Brother/Sister" kind of program where less expreienced turners are paired up with more experienced turners. It seems to work okay except for some scheduling. The pair work out their own schedule and location. I am on my second "Little Brother" and really enjoy it very much.The only problem we have right now is not enough "Big Brothers". We also have periodic "Learn-and-Turn" classes that take newer turners through a specific project from start to finish in one session. (We have one this Saturday on ornaments for the Holidays). On top of all that, one of our founding members teaches beginner classes in his shop once a month for about 6-7 months every year. And we just completed our third annual Totally Turning Symposium in Albany, NY in October. Lots of education going on here. Our beginner sessions at our meetings have been taken over by another member since Paul had been doing it for about 2 yrs. and now has conflicts sometimes. We also try to have a live demo at every meeting where folks can come close up and watch chips fly.