Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Allen Key into an Ornament Hollowing Tool?

Posts

Allen Key into an Ornament Hollowing Tool?

#1

Allen Key into an Ornament Hollowing Tool?

Larry In Lima

>Somewhere on the net, I know I saw a really good article on turning an allen key into a christmas ornament hollowing tool. It included making a handle, hardening, and I don't remember what else. I do remember that it was very good, and wanted to refer to it, before I start on one in the next few days.

Anyone got a link? Thanks. Larry

P.S. - I already know the basics, just want it more for reference / double checking than anything else.

Re: Allen Key into an Ornament Hollowing Tool?

#2

Re: Allen Key into an Ornament Hollowing Tool?

Fred in NC

>I have made handles for micro-beading bits (also from me!). The bits are 3/16" square. In checking with Allen keys, I find that the 7/32" hex key is the best fit. For a hollowing handle, I would use two set screws.


img

Re: Allen Key into an Ornament Hollowing Tool?

#3

Bare handle

Fred in NC

>I spiralled the shaft so it would take the glue better. This tool is 5" long, made from 1/2" O-1 drill rod.


img

Re: Allen Key into an Ornament Hollowing Tool?

#4

Re: Allen Key into an Ornament Hollowing Tool?

Larry In Lima

>Thanks Fred, but this article was about using a long handled allen key, heat treated and a wooden handle turned. I know yours is similar in design and function, but still looking... Larry

Re: Allen Key into an Ornament Hollowing Tool?

#5

Maybe this ...  *LINK*

Fred in NC

>


Tiny hollowing ....

Re: Allen Key into an Ornament Hollowing Tool?

#6

Re: Allen Key into an Ornament Hollowing Tool? *LINK*

Scott Hurley in N. VA

>Robert Rosand in PA specializes in small items (ornaments, etc.). He gave a demo at CAW earlier this year, where he used and sold his own tools. He sells small hollowing tools for $20, which is more than a modified allen wrench, but already made, and they work very well. Here's a link to his web page.


Robert Rosand web page

Re: Allen Key into an Ornament Hollowing Tool?

#7

Re: Allen Key into an Ornament Hollowing Tool?

John Lucas

>Larry I have a brief written article on heat treating if that will help. e-mail me and I will forward it to you. I don't discuss shapes and sharpening but I do tell how to heat treat the tools.

Re: Allen Key into an Ornament Hollowing Tool?

#8

Re: Allen Key into an Ornament Hollowing Tool?

The Wood Spinner / Bill Hale

>John

More of us may want to have this !

Please post here.

Thanks Bill

Re: Allen Key into an Ornament Hollowing Tool?

#9

Bit material?

Tony - Memphis

>Hi Fred. What are you using for your square stock for the micro bead tool?

Thanks,

Tony

Re: Allen Key into an Ornament Hollowing Tool?

#10

I would like to see it.

RevDoug

>