Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Pink Sycamore

Posts

Pink Sycamore

#1

Pink Sycamore

Bert Smith

>Thought I'd post a pic of the first piece turned from the pink sycamore I talked about a couple of weeks ago.

Rough turned after the NC symposium and DNA soaked. It stopped losing weight yesterday so I finished it up. I added a piece of bubinga to try to blend the colors.

The pink color faded a bit, but it is still unlike any sycamore I've ever seen.

Bert


img

Re: Pink Sycamore

#2

Re: Pink Sycamore

Ed Moore

>Bert,

Very nice!!! It's good-looking wood and you did a great job.

Ed

SW VA

Re: Pink Sycamore

#3

Re: Pink Sycamore

RevDoug

>Very nice piece. The wood ain't bad either.

Turn 'em round,

Re: Pink Sycamore

#4

Re: Pink Sycamore

Roger

>Hey Bert,

Bring it, or some of the wood to the meeting tonight, and see how many guesses you get as to the species.By the way, great job as usual.

Roger

Re: Pink Sycamore

#5

JL

Re: Pink Sycamore

JL

>Marvelous, simply marvelous! The simplicity of the form shows off your wood choices.

Re: Pink Sycamore

#6

I missed the small print with the size.

Dave Smith, Longview, WA

>Hi Bert,

A beautiful job on some beautiful wood. I like the transition into the collar. Sometimes collars look stuck on but this one just flows with the form. Well done.

How long did it take to dry and how thick were the sides? I have found that sycamore dries quickly after soaking in alcohol. Thinner walls appear to reduce cracks in my experience with sycamore.

Keep up the good work and thanks for posting.

Dave Smith

Waiting for dinner in Longview, WA.

Re: Pink Sycamore

#7

how is sycamore for turning?

Tom Sontag - St. Louis

>I guess the photo answers my question somewhat. You have a beautiful piece there. But as a vendor of sycamore I would like to know if sycamore is classed as 1-great for turning, or 2-good for turning, need extra sharp tools or special techniques, or 3-not really an easy choice for the lathe (lots of sanding or...).

I hope my wording of these choices do not reveal my utter lack of lathe experience.

Re: Pink Sycamore

#8

sycamore

TD

>Tom, sycamore can be a very good turning wood or it can be very bland. It tends to have a lot of silica if grown near water and if so will dull tools rather quickly; it also warps quite a bit but if that is taken into account when roughing that is not a problem. Colors vary a lot, some is pretty pink and some is very bland grayish. The grain is very coarse so finishing takes a while. Around here I get some that has the ambrosia beetle stripes and the pink color. I use it a lot when doing turning demos at festivals and it sells well when finished. You will have moderate cracking problems but anchorseal will eliminate most of them if you stay away from the pith.