Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

ornaments

Posts

ornaments

#1

ornaments

John Lucas

>These are the last things I will make before my studio tour this weekend. I will be leaving for Atlanta on Wednesday to do a demo for the Georgia Association of Woodturners. They meet at Highland Hardware in Atlanta if any of you are nearby and want to come by I'd love to meet you.

These ornaments are takeoffs on the 2 part ornament. The first one was cut, veneer added and then recut and more veneer added. The second two I cut using the technique they use to make the long pointed veneer look used in pool cues. I'm still not real happy with the shapes of these. I just don't like the finials and the V shaped rings don't really work I don't think. I'll have to sit down with pen and paper and work on these designs.

The last one is one I played with last year where I hollowed an ornament, turned it sideways and bored holes, then added turned and carved discs. I'm not real happy with the different wood choices on this one but I will work on the concept more after I get back from Atlanta.


img

Re: ornaments

#2

Re: ornaments

Jim Shaver, Oakville Ontario

>Wonderful John,

I would expect nothing less that that!

Take care,

Jim

Re: ornaments

#3

Re: ornaments

Bill Stehman

>John,

These are all superb turnings and we are always our worst critics. Your first one with the veneer lamination is simply a trial and error method of not compensating for saw blade kerf.

Excellent creativity and workmanship.

Re: ornaments

#4

Brad Vietje

Love that last one, John...

Brad Vietje

>These are nice work, and I'm sure the experimentation will produce even more fine results.

I'm especially intrigued by the last one... was that turned on one axis (and hollowed through a small hole), then bored at 90 degrees for the carved disks, -- or -- was it turned and hollowed through the larger holes, after which the small holes were drilled for the finial and icicle ?

This on has my mind working -- very nice !

Safe Spinning,

Brad Vietje

Thetford, VT

Re: ornaments

#5

Re: ornaments

Barry Turner

>I think I would like the two middle ornaments better with no V-rings. Less is more. Yikes! What am I saying? I've never turned an ornament that looked this good!

I especially like the one on the right.

Barry

Re: ornaments

#6

Re: ornaments

Ruth Niles

>Hi John,

I really like the shapes, especially the middle two. They have a Victorian(ish) form. Nice work and they are a pleasant variation.

Ruth

Re: ornaments

#7

Re: ornaments

John Lucas

>Bill Dead on guess on the first one. I realized after the first cut that I should have made the veneer the same thickness as the saw kerf. To late, so I decided to continue and see what would happen. Interesting pattern none the less. You can bet the next one will be better.

Re: ornaments

#8

Re: Love that last one, John...

John Lucas

>Brad I hollowed through the big hole, then turned the ornament around and made the second hole bigger. Then i drilled the small holes in the sides. I don't like the way the inserts stick out so the next one will have the inserts flush with the outside and if all goes according to plan the inserts will meet in the middle of the ornament and thier will be a hole all the way through.

Re: ornaments

#9

Re: ornaments

John Lucas

>Thanks Ruth. I'm going to line all of them up before Ihang them in my shop to sell and see if I can determine what features and shapes I like the best and how to put them in one good ornament. I think I'm getting close but They seem to be missing something.

Re: ornaments

#10

Re: ornaments

Bill Stehman

>John,

That is indeed an outstanding pattern. One way around using thinner veneer in those patterns is to start with a larger piece of stock and shim your piece until the patten meets, then glue up. I then square up the stock after each glue up, hence starting with a larger piece than you want the finished product. Time consuming but works. Keep up the great work.

Re: ornaments

#11

Re: ornaments

John Lucas

>Bill I'm going to go the other way. I have an excellent bandsaw and Scroll saw. I'll simply make the veneer match the cuts from these blades. For things this size I usually cut my own veneer.

Re: ornaments

#12

Re: ornaments

Ruth Niles

>Know what you mean about "something missing". After really studying these and drawing a few variations, if I may be so presumptuous as to make suggestions (something I never do). The second from left flows sweetly down to the little sharp collar; possibly remove that collar and have a smooth tear drop? The 3rd from left maybe a little shoulder (ledge) at transition from top knob to bulb and either making the sharp collar either smaller(?), softly rounded(?) or eliminate and again a smooth tear drop. The last, strickly to my eye, looks more proportioned with about 1/3 of the bottom stem removed and ending with the tear drop.

My take on the last style ornament is the stems are long and thin as a "woodturner thing" or challenge. Several "regular" people suggested I make the stems shorter for better proportion, easier hanging on a tree and more "user friendly" (they're not as afraid of touching/using them) and now the ornaments are selling a bit better for me.

Please forgive my critiqe as I really am not that knowledgable, just an opinion.

Ruth

Re: ornaments

#13

Re: ornaments

John Lucas

>Ruth I agree with your idea about the transition from bulb to bottom. I think I'll come out about 3/16" at a roof line kind of angle and then taper it at the same taper as the bottom of the bulb and then just go on down to the tip. For some reason I don't like the straight pointy tip. I just feel like it needs a ball, egg shape, or something down there.

I also agree with you on the long finials. I love them but it does make them delicate and I think people do pass them up because of that. It's funny they always ask is this thing fragile and I say with a laugh of course it's a Christmas ornament. I explain that they aren't as fragile as they look but tell them to be careful they aren't indestructable.