Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Old new Nova DVR (Mild Gloat)

Posts

Old new Nova DVR (Mild Gloat)

#1

Old new Nova DVR (Mild Gloat)

Doug Bartos, Md

>I have been racking my brain for about a year now on what lathe to get. I was going back and forth between the Powermatic and the Jet 1642. I had kind of eliminated the Jet because I really didn't need a 42 inch bed and I hadn't gotten the Powermatic mostly because of the difficulties in getting it into my basement.

I had gone over to the Woodcraft store on a whim last Friday night to look at the Nova DVR that they had there. The price was $1999 so I wasn't really considering it since I could get a Powermatic for just a couple of hundred more. But when they told me that they would give me 30% off including the stand, I couldn't resist. I called to get permission and it was mine. The lathe had never been used, however, it was manufactured back in Oct 2003. The lathe is great. I have had a Fisch mini for the last two years and was satisfied but wanted to do some larger stuff. I can't believe how smooth this lathe is compared to the Fisch. I was also able to get it down into my basement without hiring movers. It came with the Woodcraft stand which I am going to turn into a buffing and grinding station. I turned a 12" walnut bowl from an unbalanced blank that I have had hanging around for a couple of years and it was great. The one thing that I didn't like was the resonation from the metal stand, so I rebuilt the stand that I had set up For the Fisch. It is made out of cinderblocks and wood and have added about 400 pounds of sand. Not real pretty but makes a big difference.

Does anyone know if you can upgrade the firmware on this lathe? The version that I have was released right before they started putting in the programming for the 5 preset speeds and I would really like to have that feature.

Thanks to all of you who have given your pros and cons and opinions on the various lathes out there. WoodCentral has been an invaluable source of ideas and thoughts that have made my turning much more fun and imaginative. I was an agonizing decision but then again that's half the fun.

Doug

Re: Old new Nova DVR (Mild Gloat)

#2

Re: Old new Nova DVR (Mild Gloat)

DD

>I wrote an e-mail to Teknatool and they indicated they are looking at a way to download/upload new firmware. This was about a month ago and the response I received indicated that something will be out within a year. I would recommend you send them an e-mail basically requesting the same thing to help them move it along internally. If enough of us request it , they may move it up their priority list.

Carole from VA, who posts here frequently also just got a new DVR, and if I remember correctly, it came with version 4.51 of firmware. I don't know if that version has the preset speed functionality, though.

Doug D

Re: Old new Nova DVR (Mild Gloat)

#3

Re: Old new Nova DVR (Mild Gloat)

Doug Bartos, Md

>Thanks Doug,

I wrote to Tim Geist this afternoon to ask about the updates. Carol's version (4.51) is the one that they used on the Technatool website video that shows how to use the pre set speed change. I think that it changed in the version after mine (4.13).

Doug

Re: Old new Nova DVR (Mild Gloat)

#4

Re: Old new Nova DVR (Mild Gloat)

DD

>Doug,

I have version 4.22 and it doesn't have the programmable speeds in it. Somewhere between 4.22 and 4.51, it was introduced, probably towards the 4.51 release. I visit their website relatively often and noticed the video in the last 2 months with this feature demonstrated. I am wondering if one will have to buy a complete new control board, or will there be a cheaper way to upgrade. If 4.51's feature set improvement over 4.22 is only related to the preset speeds, and one must buy a new board, it doesn't seem worth it to buy a complete new board for the likely costs involved.

Doug D

Re: Old new Nova DVR (Mild Gloat)

#5

Re: Old new Nova DVR (Mild Gloat)

Doug Bartos, Md

>Doug,

I agree. If anything, I think that I would wait until the upgrade XP board comes out. It is supposed to develop more power and I don't know what else. I've only had the lathe for a week so I'll probably stick with what I have. The 5 preset speeds just aren't that important.

I had written to Tim Geist a couple of days ago and he must have forwarded my message on to Technatool. They asked me for my serial number and said that they would get back to me with prices for what I would need to upgrade. I will let you know what I find out.

Doug

Re: Old new Nova DVR (Mild Gloat)

#6

Does it come in Home and Pro versions

Phil Joines

>and get upgraded every year? Maybe they are taking lessions from Mr. Bill.