Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Woodcraft slow speed grinder

Posts

Woodcraft slow speed grinder

#1

Woodcraft slow speed grinder

Bill Stehman

>I too bought the Woodcraft slow speed grinder and have the wolverine system. I mounted my new grinder to the stand and turned it on and we both rock and rolled around the shop. I tried truing up both wheels and we then did the tango. Called Woodcraft and they fed - ex me two new wheels. After installing them and truing both up we slow danced around the shop. I then took all four wheels to a machinist friend and he threw all four wheels in the trash and laughed at me. Well, it's not the wheels per say but the "soft" plastic inserts for shaft size. You can true and true but never achieve perfection because of these. I ordered two wheels and the balancing system from one-way ... big $$$ but I now have a precision system. One also has to true both sides of the wheels with a flat diamond tool.

If any tool caches while grinding... one must have the tool lower then center.... my $.0002 and experience.

No more dancing around the shop... chuckle... enjoy

bill

Re: Woodcraft slow speed grinder

#2

Re: Woodcraft slow speed grinder

Carole in VA

>Strange. I can balance a nickel on my Woodcraft slow speed grinder (and yes, that's while it's running!) Go figure.

Re: Woodcraft slow speed grinder

#3

Ah Ha! You got the good one!

Barry Irby

>Actually, I have one I have been using for four or five years with no trouble. I am slightly ticked I got the 3/4" stones and the new one come with 1". OTOH mine runs smoothly.

Re: Woodcraft slow speed grinder

#4

Re: Ah Ha! You got the good one!

Norm Smith in Nova Scotia

>I also bought one a few years ago and it works great with my wolverine jig.

Norm

Re: Woodcraft slow speed grinder

#5

Same Here - mine works fine, also

Scott Hurley in N. VA

>

Re: Woodcraft slow speed grinder

#6

Re: Woodcraft slow speed grinder

Juergen

>Don't throw away the wheel, just the plastic insert. I always turn my own inserts from some hardwood, it solves the problem 9 out of 10 times. My wheel spins for 3-4 minutes after turning off the grinder.

Re: Woodcraft slow speed grinder

#7

Ditto

Tony Shaftel

>Bought mine three years or so ago and I've been very happy with it.

Re: Woodcraft slow speed grinder

#8

Re: Ah Ha! You got the good one!

William Duffield, on the Cohansey

>Mine works fine. Original wheels are OK, too. Im sure it would work smoother if I got the Wolverine wheel balancing gizmo, but that seems to be a lot of money to pay for a marginal improvement.

If you got a lemon, that's what the WoodCraft guarantee, and their top of the line prices are for. They'll take care of it.