Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Jet JPL-385

Posts

Jet JPL-385

#1

Jet JPL-385

Steve S.

>Hi Folks,

This is my first time posting here. So pleas bare with me and exuse my poor spelling.

I dont know how many of you got the latest E-mail flyer from Rockler, but it had a deal for a Jet pen lathe. Reg. $129 for $69 and $10 more off any purchases over $50. So with shipping it was only $69.98. I just couldnt resist. Its my first lathe, and will be my first attempt at turning anything. My shop is set up mostly for cabinetry and hobbying. TS, planer, BS, DP, MS, DC and the typicle hand and power tools. I have always been curious about turning and this is a good way to find out if its something my wife and I might like to do. By good way, I mean if we suck at it or dont get into it, we are only out $70.

My questions are (finaly) does anyone know where to get any info on the pen lathe? What does it come with? Can I just pull it out of the box and start turning? Is there a web sight where I can get some sort of a tutorial or info on what a person will need to get started? I will probebly get a book of some kind but im pretty isolated where I live and I have a real problem waiting for stuff in the mail. I would like to get some ideas befor the lathe comes, which should be Tue or Wed. Iv seen all sorts of stuff about mandrels and bushings and #2 morse taper mandrels,,,,,, I have no idea what any of that means.

I just cought Wood Turning Techniques on TV and it explained a little about the bushings, but im still pretty in the dark.

Any help would be greatly appriciated. And sorry for the loooonnnnng post.

Steve S in Bullhead City Az.

Re: Jet JPL-385

#2

Re: Jet JPL-385

Ron in Drums PA

>Steve

Save your money, Jet stopped making this lathe because it is a junk.

Re: Jet JPL-385

#3

Re: Jet JPL-385

Carole in VA

>Steve,

I really don't think a pen lathe is a fair trial to see if you like turning. You would be much better off with something like a Jet Mini. You can use a mini for pens as well as larger stuff like bowls (up to about 9 inches) If you decided you don't like turning, the Mini has a great resale value. It seems that most folks who start with a Mini and upgrade always keep their Mini if they have room! The other option is not to buy a lathe at all initially, but take a beginning class at a Woodcraft or a local turners club. Or even just go to a club meeting and see if someone will mentor you or let you try turning on their lathe. Most turners are eager to see someone get started on turning. JMHO

Re: Jet JPL-385

#4

Re: Jet JPL-385

Bruce Wiseman

>Well Steve, Ron and Carol are correct but it sounds like you have already spent the money. If I recall this lathe, it takes a '0' Morse taper. And it used to include a madrel and small turning tool or two in the box. Be aware that you can only make pens with this lathe and it will NOT give you a feel for doing other turning. Do a web search on pen making, there are lots of sites that will show you the basics. Start simple, make the slim line 7m pen kits. If you can get a book by Dick Sing "Pens from the Wood Lathe" I recomend you do so. Good luck. Please post some pics of your first pens.