Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

scroll chuck reccomendations

Posts

scroll chuck reccomendations

#1

scroll chuck reccomendations

Eaglesc

>I am considering getting a scroll chuck.

I want one that will grip a four sided piece of stock 3/4" square.

I am a neophyte when it comes to this type of chuck.

I want it to be self centering.

Shop made is good but have know idea as to where to start to make it and be accurate.

Plan "B" is ready made, what do you reccomend?

1x8 thread on the jet mini.

Re: scroll chuck reccomendations

#2

Re: scroll chuck reccomendations

Spence in Rhode Island

>Hi Eagle, price wise the $89 Grizzily scroll chuck can't be beat. Mine has been in constant use for almost 6 months now and have had no problems. Drilling blanks are a snap. :) If money is no problem go for the vicmarc of which the Grizz is a copy.

Just my $.02

Regards,

Spence

Re: scroll chuck reccomendations

#3

Re: scroll chuck reccomendations

Matt Berry in Mi

>The supernova2 is a good choice too. The jaws will also fit the other sizes too. So if you have a bigger lathe or buy one in the future you can use the jaws on another sized teknatool chuck.

Re: scroll chuck reccomendations

#4

Re: scroll chuck reccomendations *LINK*

JimQ

>Penn State Ind is still offering their original chuck for $45 at this link as an e-mail special.

JimQ


http://www.pennstateind.com/store/e-10229.html

Re: scroll chuck reccomendations

#5

Re: scroll chuck reccomendations

john in KS

>If you order the PSI utility chuck, be sure to check the runnout. I ordered one several weeks ago, checked it and immediately returned it. I did not have to gauge it, since it was so obvious by just eyeballing. Someone posted on another forum that they had the same problem with 3 of them before they gave up. Others have reported the problem is the threaded adapter, but I had an older one of these chucks to check the adapter with and the problem with this one was not the adapter. I could have exchanged it but opted for a refund. The other one that I have works well, but do not have anything to compare it with.

Re: scroll chuck reccomendations

#6

Re: scroll chuck reccomendations

tek-Brunswick, Ohio

>If you can afford a little more expensive chuck, around $200 I think. The One-Way Talon chuck is very versatile. You can use it to hold the � by � blanks and hold many other things, such as bowls, boxes, goblets, and hollow forms. The chuck holds well on a straight-sided spigot, so you don�t have to worry about dovetailing the spigot. There are also different accessory jaw sets available that make it even more versatile. I have had mine for 2 years now and have had no problems. It does need an occasional cleaning to keep it working smoothly, but any chuck will need that.

Tom

Re: scroll chuck reccomendations

#7

Re: scroll chuck reccomendations

Kurt Aebi

>Eagle,

I have (2) PSI Utility Chucks (the $45.00 variety) and had problems with the first one - the adapter fixed that problem. The only problem that I personally have with these is the Tommy-Bar adjustment - it seems to take 3 hands to mount something onto them. Aside from that - they work great!

I also have one of the new Baracuda 2 chuck systems (runs around $150.00, but has all the jaws you would need as well as a woodworm screw - just no Jumbo Jaws). It ran smooth and true right out of the box. I like it and with the "T" handle adjustment, it is real easy to mount the wood you are going to use. The main problem with these right now is the ridiculously LONG Lead time for their orders! I ordered mine in July and it was delivered 2 weeks ago!

The Grizzly looks to be a good chuck and I've heard good things from those that have them.

Woodcraft has a sale on NOVA chucks right now, they are notoriously a good chuck.

Now - my recomendation: Try the $45.00 PSI chuck - at that price, you can test the waters without spending bunches of cash and it comes with 3 sets of jaws and a screw adapter, so you can do just about everything you need with it. Just make sure you try the thing out right away to make sure it runs true on your lathe. One problem that I've had friends say is that the chuck doesn't bottom out on their spindle and they need to add washers behind the chuck for it to snugly seat to and that also has solved some out-of-round issues.

I make this recomendation because, I'm cheap and hate to spend lots of money!