Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Minimum Lathe/Tool Set-Up for Turning Class?

Posts

Minimum Lathe/Tool Set-Up for Turning Class?

#1

Minimum Lathe/Tool Set-Up for Turning Class?

Joe Hurst

>Fellas-

Forgive me for asking such as basic question, but here goes:

I'm considering applying for a relatively small grant ($3500 or so) to bring bowl turning back into our college's fine art program. Could anyone suggest a few machines that offer the most "bang for the buck" (ideally, I'd like to start with 2, maybe 3 machines...more would be better) AND a bare-bones turning tool list?

Ideally, I hope to enlist the help of the engineering department to build a BIG lathe in the near future, but you have to walk before you can run.

Thanks in advance,

Joe

Re: Minimum Lathe/Tool Set-Up for Turning Class?

#2

Re: Minimum Lathe/Tool Set-Up for Turning Class?

David Propst

>Of the top of my head here are my thoughts... For that budget I would consider aquiring Jet VS mini's with stands. The machines are great for learning and the small size may be less intimidating. Sharpening is a fundamental basis of turning, so you also will need one or two grinder set-ups, preferably with a jig system like the Wolverine. As for tools, most of the tool makers have basic sets of spindle and bowl tools. Remember face shields!

David

Re: Minimum Lathe/Tool Set-Up for Turning Class?

#3

JL

Re: Minimum Lathe/Tool Set-Up for Turning Class?

JL

>I'd go with 2-3 Jet minis (with or without variable speed). The belt driven ones would still work. Stands or carts. An 8" grinder with a Wolverine system with a Vari-grind jig. A "beginners" selection of tools (Henry Taylor or Crown) - probably 1 set more than you have in lathes.

Re: Minimum Lathe/Tool Set-Up for Turning Class?

#4

Re: Minimum Lathe/Tool Set-Up for Turning Class?

David Breth

>Do not ignore dust collection and respiration considerations. Not only are students being significantly exposed to sawdust, but I would think the school could potentially be exposed to legal problems should somebody develop a chronic problem or experience severe allergies to particular woods, etc.

Re: Minimum Lathe/Tool Set-Up for Turning Class?

#5

List seems to growing....bump up the amount of $

kevinT in T Bay

>