Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Buying know-how needed on the Beal system

Posts

Buying know-how needed on the Beal system

#1

Buying know-how needed on the Beal system

Pete in Holland, MI

>Thinking about taking the plunge on buying the Beal buffing system, but have seen many acessories. Most of my work are bowls up to 11" diameter. Any parts and pieces that "needs", "wants" and "avoids" with the system?

Your guidance has been much appreciated in the past !

Pete

Re: Buying know-how needed on the Beal system

#2

Re: Buying know-how needed on the Beal system

John Lucas

>Pete Get the 10 " extension shaft. I think I bought mine from Craft Supplies. It gives you so much more room to work.

Re: Buying know-how needed on the Beal system

#3

Re: Buying know-how needed on the Beal system

Devon Palmer

>I started off with the 3 inch bowl buffs then later went to the 4 inch becuase of the higher surface speed. The 4 work so much better that I hardly use the 3 inch any more.

- Devp

Re: Buying know-how needed on the Beal system

#4

Re: Buying know-how needed on the Beal system

James McClure

>If you're going to do small or deep bowls, then you'll probably want to get the bowl buffs. They come in 2", 3", and 4" sizes. It's hard to get inside a bowl with the 8" buffing wheels.

Re: Buying know-how needed on the Beal system

#5

Re: Buying know-how needed on the Beal system

Bruce McElhaney Spring Lake, MI

>Diddo on the extension shaft.

Re: Buying know-how needed on the Beal system

#6

Re: Buying know-how needed on the Beal system

Barry Irby

>A small thing. You will need the "draw bar" through the head stock. (1/4 or 3/16 threaded rod that holds the center into the taper) My buffs won't stay seated without it and I don't want the tailstock in the way.