Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

First post

Posts

First post

#1

First post

Michael Serpa

>Hello, this is my first post so I thought I'd show my latest work.

This 'seed pot' is made from spalted Ornamental Pear and is 3.5x5 inches , textured with Dremel ingraver and finished with Watco oil.

Hope you like it. Mike


img

Re: First post

#2

Hmmm...didn't I see this on WoW?

Carole in VA

>As a cover piece, in fact? :) It's a great piece. Congrats and welcome to WC. Lots of great folks here. I just can't imagine how long it took to do that texturing with the dremel engraver! This may your first post but I certainly hope it's not your last.

Re: First post

#3

First post

Michael Serpa

>Yep it was, Carole, and thank you. I've been lurking for some time now and feel like I already know some of the folks here. Good group.

The texturing took around four hours over a three or four week period. I can't do very much at a sitting. My hand gets numb after twenty minutes or so. Even so I think it's worth the effort. I guess I'm masochistic!

And yes there'll be more.

Re: First post

#4

Re: First post

JamieDonaldson

>Michael- I really liked this piece when it was posted on WOW, and I assume you used a blunt point on the engraver? I learned a similar texturing technique from John Jordan years ago that should be less labor intensive. Make a blunt bit from a 16 penny nail and mount in a reciprocating power carver like the Ryobi- goes much faster and without so much hand and wrist wear.

Re: First post

#5

First post

Michael Serpa

>Jamie-I also learned this from John Jordan and I, recently, picked up, on Ebay, the Ryobi carver but haven't used it yet. I also have a pnuematic gasket scraper that works well. I have psoriatic arthritis so all of these tools are problamatic in one way or another. When I took Vioxx I could finish a piece like this in an hour!! Oh well that's life! Just have to add a few dollars to the price! :-)

Re: First post

#6

Re: First post

Jennifer@Indy.USA

>Michael, I saw this over on WOW and fell in love with it instantly! I love this wood. It's gorgeous. Your form is really great too. I've been tinkering with these sort of forms as of late and am really enjoying the challenge of trying to get them right. you've done a great job here. I love the texture too.

Bravo!

Jennifer

Re: First post

#7

Re: First post

Ed Kelle

>I saw it over at WOW and loved it there. Now I keep looking at it here as well. I was even describing it to someone during my turning lesson yesterday, so you know that it is really quite a stunning work if people are remembering and talking about it offline as well.

I hope to someday achieve a piece as great as this someday. Very very well done!

Re: First post

#8

Re: First post

Michael Serpa

>Thank you Jennifer. I think my shapes dirive, in part, from a longtime appreciation of South Western pottery. Someone recently asked "how long did it take you to come up with these shapes"? "All my life"

Michael

Re: First post

#9

Re: First post

Michael Serpa

>Thank you Ed. This is really gratifying to hear. I can't think of a nicer compliment. And Ed, turn turn turn and turn some more!!!!

Michael