We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>In the absence of anchor seal (or equivalent), what could be substituted? I'm going to be given some basswood (allegedly), a 4 foot branch that came down in a storm, but left untreated. I'm thinking to cut some off the ends once I get it, and then apply some because I don't have anchor seal at the moment and kind of have to wait for Christmas to get some. Would tung oil, for example, be a poor man's substitute?
>Another option is some yellow or white wood glue. Just coat the surface. In the long run it is more expensive than anchor seal but in a pinch it does. Work. Canning wax will work also, just melt it carefully in the microwave in a measuring cup and brush it on. Or put it in a pie pan and dip the wood into it. Hope this helps.
Satisfactory end coatings include water-based wax, asphalt-based roofing cement, aluminum paint in a spar-varnish base, and paraffin.
If course, the roofing cement may not be appropriate for your application! If you have a Woodcraft store nearby, they carry the water-based wax emulsion (Anchorseal or equiv.) in 1 gallon jugs. If you belong to a turning club, call around - someone may gladly loan a cup of sealer.
BTW, I agree with the advice to melt paraffin in a double boiler. Set some on fire just once (with a spoon over a candle) and you'll see why!