Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Turning laminated plywood?

Posts

Turning laminated plywood?

#1

Turning laminated plywood?

Brian Gray in Sandusky, OH

>I'm thinking about laminating plywood and turning it to kind of mimic Kerry Vesper's work. If I'm not mistaken, I believe that Kerry does his shaping with grinders, and doesn't turn, however.

Has anyone done this with larger diameters? I'm thinking that plywood might not be the greatest material, and I'm a little afraid of it exploding on me, especially if I try to do a bowl or hollow form.

Maybe I should stick with hardwood laminations, and not plywood.

Thoughts?

Re: Turning laminated plywood?

#2

Brad Vietje

Re: Turning laminated plywood?

Brad Vietje

>Brian,

Its been done for many years. I've only done this on a small scale. You can turn it, but its rough on tools and dusty. Remember that a lot of glues produce dust you wouldn't want to eat or breathe. If you decide to laminate up some plywood, use the best quality stuff you can find, without voids. Steven Gleastner of Maine uses thin aircraft plywood, and makes up blocks from a number of sheets glued in a pneumatic press. I've also heard of something a friend calls "heel material" -- essentially a multi-ply stack of hardwood (Maple), used to make stacked wooden heels on shoes. Maybe a shoe manufacturing company will sell off cuts, if they still make shoes in the US ...

The segmented folks can give you better advice on glues, etc...

Safe spinning,

Brad Vietje

Thetford, VT

Re: Turning laminated plywood?

#3

Clogging and dancing shoes ... *LINK*

Fred in NC

>Some dancing shoes have wood heels.There are still a couple small factories in the US.


Info on shoes with wood heels

Re: Turning laminated plywood?

#4

I have done a little .....

Fred in NC

>Little is right. I made the cabinet for my Jet Mini out of 3/4" birch plywood. One day I found myself looking at a piece of 3/4" wide scrap, that is, a square piece the size of a pen blank. The idea immediately popped into my mind to try making a pen out of it.

I cut to 2-1/8" pieces, and drilled lenghtwise with a 7 mm bit. No problems here, the hole went straight through the blank. I glued in the brass tubes, and turned it. Again, no problems. The pen has been in my pocket over a year. It has been a conversation piece every time I show it.

The thickness of the wood at the widest part is about 3/32", and at the ends about 1/32". The dark stripe you see in the pic is the middle layer of the plywood. There were only 5 layers total. The two outside layers were turned off.

Next year I will experiment using this kind of plywood to make bowls and boxes. I hope my pics will be better by then.


img

Re: Turning laminated plywood?

#5

Plywood Bowl

Stuart Johnson

>I have been working on form and decided to stop wasting wood so I made this bowl up out of plywood scraps. It actually turned much easier than I thought it would but you do need to sharpen regularly. I used tite bond 2 to glue up the segments.


img

Re: Turning laminated plywood?

#6

Re: Turning laminated plywood? *LINK*

John Lucas

>Brian I have turned some but don't have any photos of it. Wish I had I liked those pieces a lot. High quality plywood works much better than the cheap stuff. Less voides and better turning in general. You can still turn the cheap stuff you just have to find a material to fill all the voids with.

I met Stephen Gleasner several years ago at an AAW symposium. That man knows how to turn and color plywood. check out the link. Oh by the way he's a really nice guy and does a wonderful demo on coloring wood. I highly recommend him if you get a chance to see him in action.


http://www.stephengleasner.com/

Re: Turning laminated plywood?

#7

Re: Turning laminated plywood?

Lowell Converse

>It can be done if you persevere. Titebond works fine. Lots of dust, and quickly dulled tools. Plus you will have tearout to fill.

This piece is 13' diameter.


img

Re: Turning laminated plywood?

#8

Re: Turning laminated plywood?

Fred Holder

>The Seattle Chapter of AAW had a Frisbee contest for their August 2005 annual picnic. Frisbee's were made from many different types of wood and laminations. I made up my blank from two pieces of 1/2" birch plywood and a piece of 3/8" birch plywood. They were glued together and a piece of wood off the shelf was glued on to serve as a tenon for holding while turning the inside. I soaked the whole thing in Turner's Choice (aka CedarShield). It turned very well. Here is a picture of the finished frisbee.


img