Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Short report on NC symposium

Posts

Short report on NC symposium

#1

Short report on NC symposium

Gary Evans Tallassee, TN

>Hi all,

Got back about midnite from the NC show. Had a flat tire coming in the driveway, so I can't stay long. Got to go put on the spare so I can go to work.

In my opinion, it was an excellent symposium. They had an attendance of around 175, although they were hoping for more. I heard a lot of good comments about the presenters, including our own Mark Kauder.

I talked to a lot of guys who knew me and who I knew through WC. This forum is like an introduction filter. It gets all the self-conciousness and awkwardness of a first meeting out of the way, so that it's like you've known each other for awhile when you finally meet face-to-face. Quite remarkable, it seems to me.

One of the most unique things that I saw this weekend was a denim Christmas tree ornament by Lan Brady, who is one of the WC family. He takes denim scraps, laminates them with epoxy and turns the resultant block. To me it was just an ingenious way to create a new turning material. Looked neat, too.

I got to spend a few minutes at his home with Gary from Zirconia. I picked up a 1.5 HP motor for my bandsaw (Yippee!) I had no idea that he was my friend Gary Bills, who I've met at the GA symposiums for the past few years.

Lest I forget, a big public thanks to David Propst and his family for their hospitality on Friday night. I'm planning on living to be at least 80 so that I can marry his little daughter, Gabriella. She is a beautiful princess.

Another special thanks to my favorite WC friend, Ruth Niles. She drove all the way down from NE PA to share my booth. We had a great time together. Looks like we are going to do FL together with the possibility of AZ, also.

I said I was going to make this short, but that's hard to do when you are recounting such a wonderful experience.

Bert, thanks for the sycamore one more time.

Gary Evans

Talasi Hardwoods

P.S.: I even sold a little wood while I was there. 8^]

Re: Short report on NC symposium

#2

Welcome to North Carolina

Wayne Cooper Charlotte NC

>This was my first symposium and I was very impressed. The presenters and programs was fantastic. I really enjoyed the gallary and it was very humbling for a beginner. Gary, I am sorry we did not have a chance to visit, your booth was always busy and I did not want to interfer with a 'Cash' sale. You have a great partner in Ruth Niles. I have been very impressed with the way she has took an idea and turned it into a very sucessful product. Come back to North Carolina and come down to Charlotte. Wayne

Re: Short report on NC symposium

#3

Re: Short report on NC symposium

Lan Brady

>Gary,

It was my first symposium and I had a great time. I cannot imagine a show having more oppertunites for beginners as well as experienced. I did not know there were so many pieces of burl left in the world. I really hated having to decide between which demo to attend. All were great.

The highlight was meeting WC folks like you and Ruth. I hope we cross paths again. Thanks for your experience.

Lan

Re: Short report on NC symposium

#4

Re: Short report on NC symposium

Raymond Overman in SC

>Gary,

It was nice to meet you too. I wish I could have stuck around for both days and had a chance to see Mark Kauder's demo. There was a lot of talent there. I did enjoy talking to everyone and got a head full of ideas. Now if I just had the skill to get them into the wood.

As for Ruth, I turned my first bottle stopper using one of her kits last night. I really like them. Hopefully I can turn a lot more for a local craft show the Saturday after Thanksgiving.