Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

want to make my first pen

Posts

want to make my first pen

#1

want to make my first pen

Arw01

>Don't have a lathe proper, but do have a router crafter which I can either spin up with a hand drill, or actually use with a router.

What is the minimum equipment I need to have to use a simple pen kit to make my first pen?

I know I will need to buy a 7mm drill bit, but what after that?

Thanks

Alan

Re: want to make my first pen

#2

Re: want to make my first pen

Carles in Barcelona

>Hi,

Two good links:

http://www.woodturner-russ.com/Pen10.html

http://www.penturners.org/

Un saludo,

Carles.

Re: want to make my first pen

#3

Re: want to make my first pen

eaglesc

>I believe you can go to the Rocklear site( at least it used to be there,) and there is a link that shows you how to make a pen on a drill press.

How good are you at whittlng?:>)

Re: want to make my first pen

#4

Re: want to make my first pen

Arw01

>I've ordered the Pen Making DVD from Penn State Industries. Will see what all is on there for information in a few more days. Believe I will check with my local machine shop to see what they have for 7mm drill bits, and I already have a 10mm bit for SOSS round hinges.

Perhaps they have a Pen Mill to straighten the blank to the tube and I will be most of the way there.