Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

How many times do you

Posts

How many times do you

#1

How many times do you

Dustmaker Mike

>mess up a small project and start over again before you say enough for the day?

I started out this morning wanting to make 4 bottle stops. On the first one I took one last little cut and caught an edge split a chunk of wood off. The second one looked I was useing a scerw driver to cut it not sure what was up with that, Spindle Master was the tool it won I put it down and used the Skewmechisle or something like that and finshed two before the last one went sailing across the shop in two pieces. So I got three made and walked away before I tried the last one. I guess there is Football on and I can always do it tomorrow after work.

Mike needing pratice with the spindle master.

Re: How many times do you

#2

Re: How many times do you

Carole in VA

>Well I have made 3 stoppers for the bias-turned jar I did. The first one fit perfectly but it was cherry which didn't look good with the maple and I didn't particularly like the shape. The second one, of maple, I liked the grain and the shape but I shaved just a tad too much off the tenon so it is looser than I like. The third one fits but is not as pretty grain as the second one and the shape is a tad different. I am running out of scraps to turn the stupid stopper from! What's a girl to do? FInd some more wood and Keep turning, I guess.

Re: How many times do you

#3

Re: How many times do you

Brian Hahn in SW Wisconsin

>Too many!

I made an inside-out egg and needed an egg cup / stand. The first couple were cherry. But I didn't like the finish on one, the shape was wrong on the others. Also the cherry was too dark and since it was also an inside-out turning, it was competing with the egg. Tried a couple simple ones from maple and one of them was OK. So I tried polyester casting resin with a very pale yellow color gradient. It took half a dozen tries to get the gradient right. Then I had to re-turn a few because the shape was bad and I'd finally figured out how to turn the resin. Got and real nice one and a very acceptable one. The really nice one had a buffing wheel incident and it was still mounted in the chuck at the time. The weight of the chuck was too much for it when it hit the floor. I decided to settle for the very acceptable one.

But my most difficult one to date was an inside-out ornament that I did last winter. The inside was a Christmas tree and I just couldn't get the shape and dimensions right. After 15 starts, I had one keeper. It took a total of 24 starts to get the six ornaments that I needed for gifts. Arrgh!!!

Re: How many times do you

#4

Re: How many times do you

Terry Quiram, Roanoke Illinois

>I was going to turn some tops last night and I "unchucked" twice bouncing them off my faceshield. I decided not to press my luck, 2 was enough for me to turn off the lights.

Terry

Re: How many times do you

#5

Re: How many times do you

Ken DeMarco

>Mike, you Kill me "used the Skewmechisle or something like that " I think that might be a good name for any skew ;^0

all in all sound like most days in my shop

thanks for the laugh

Ken DeMarco

Re: How many times do you

#6

Keith Tompkins

Re: How many times do you

Keith Tompkins

>Hi Mike, I think we all have times when nothing goes right. I think the key is practice....if we know exactly how a tool will behave, we can be more confident in our approach...and have far more success stories than failures. I like to use a musical analogy.....I know several professional musicians. They practice their scales daily to stay sharp. As turners, we should follow their lead.

Imagine having a bad day turning....and you're doing a demo! PS: Try a detail gouge for your stoppers...

Re: How many times do you

#7

Re: How many times do you

JimQ

>Good thing you were doing small things, or you could have had your lights turned off for you. :)

JimQ