Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

WC Turning Symposium?

Posts

WC Turning Symposium?

#1

WC Turning Symposium?

TDaniel

>Carol's thread below raised a question that we discussed a year or two ago here. "Do we want to have a WC turning convention?" My shop would be available for this if we want to do it. I can have 8 lathes set up and there is room for campers and tents and I have plenty of outdoor cooking facilities. I could also invite some very serious buyers for quality turnings so folks like Wally, Dave Peebles, Joel, Russ, MM, Joe Fleming, Mark K., Mac, Molly, Carole, e, and on and on.... could pay for their trip by selling a piece of their work. Any thoughts?

TD

Re: WC Turning Symposium?

#2

Re: WC Turning Symposium?

Ed Moore

>Where are you?

Ed Moore

Re: WC Turning Symposium?

#3

Remember When

Barbara Gill, Remlik VA

>A bunch of us went to Murphy NC to gather at Phil Wall's house? That sure was a good gathering.

Re: WC Turning Symposium?

#4

I was there

TDaniel

>Yes Barb, I made it to one of Phil's get togethers and it was a lot of fun. I met Dick Tuttle there and he was very helpful in getting our club started. I am only 45 minutes from Phil's old place.

TD

Re: WC Turning Symposium?

#5

Re: WC Turning Symposium?

TDaniel

>Ed, I am in extreme north Georgia, just south of Murphy, NC. 3 hours to Asheville, NC or 4 hours to Nashville, TN.

Re: WC Turning Symposium?

#6

Re: WC Turning Symposium?

Ed Karch in No.VA

>I would try and make it.

Re: WC Turning Symposium?

#7

Re: WC Turning Symposium?

Mark Wollschlager

>Sounds lke a neat idea.

I would just need to get in a class at JCCFS to round things out more.

mark

Re: WC Turning Symposium?

#8

Re: I was there too!

Bob Elliott

>It was Saturday and I was there for a only few hours before heading home to Florida. Gary Hearne had his new Stubby. I still have the picture of TD turning on that Stubby.

Dick is in the picture(black baseball cap), David Probst is back in the corner talking with Barbara Gill.


img

Re: WC Turning Symposium?

#9

JL

Re: WC Turning Symposium?

JL

>I am interested in attending as a student. The drive wouldn't be too terribly far.

Re: WC Turning Symposium?

#10

We are all students :)

TDaniel

>

Re: WC Turning Symposium?

#11

Ditto

John Lucas

>When you stop being a student you stop learning.

Re: WC Turning Symposium?

#12

Re: Remember When

Gary Evans Tallassee, TN

>I was also there. Someone has a picture of Dave Propst's 4 yr old, Gabriella, sitting in Terry's big bowl. That was a great time. I miss Phil and Dick both. I think about them often.

I'll be there, Terry, if we can put it together. Do you need a wood vendor? 8^]

Gary

Re: WC Turning Symposium?

#13

Re: WC Turning Symposium?

RevDoug

>If there is any way, I'll be there. If it ends up in N. GA, I think I'll show up a bit early to collect on that offer of a lesson or two. Could even bring my mini along as an extra. Sounds like lots of fun.

Turn 'em round,

Re: WC Turning Symposium?

#14

Re: WC Turning Symposium?

Dave Peebles Lyons, Ohio!

>Hey T.D.

I think it was on a chat a few months ago that I suggested this very same idea.

I am all over this!! I will attent no matter where it takes place. It seems that all of the gatherings I have had the good fortune to attend ended up as a turning symposium. :)

I have met many of the fantastic turners on this site, but my goal in life is to meet and learn from all of them!!

Just tell me where and when.... I'll be there

Dave

Re: WC Turning Symposium?

#15

Re: Remember When

David Propst

>Gary Evans, my wife, and I talked about Phil's jamboree last Friday night. That was such a wonderful weekend. I'll do my best to be there wherever we have it!

David

Re: WC Turning Symposium?

#16

For those who went to Phil Wall's gatherings

TDaniel

>and others who are interested. Phil's get togethers were a combination of teaching and "hands on" time. The teachers were not paid; there was no charge, there were no set time limits for the presentations but there was a lot of learning going on. My thoughts are to continue what Phil started. I have my old sawmill shed that can be used as well as my shop and we could spread to our club meeting place a mile away if the crowd were big. I could have at least 8 lathes available and I am sure some of you could bring one also (Gary Hearn brought a Stubby to Phil's). The only problem with Phil's gathering is it was always too short. :) I am thinking we need to do this for 5 days. Everyone would not have to stay the entire 5 days but could pick days to fit their schedule. If we do this before May 1 I could get a group off season rate at a very nice state owned park which is about 25 miles away. Also, Russ, since you were here I had a dozier come in and flatten the area behind my shop so there is now room to park several campers and pitch tents. Bathrooms are no problem as I am surrounded by trees. We can talk more about this Wed night but my place is available if needed.

TD