Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Maple Bowl

Posts

Maple Bowl

#1

Maple Bowl

Spence in Rhode Island

>Silver Maple bowl about 10" wide and 3 1/2" high. Walls are a 1/2" thick throughout. Finished with shellac/walnut oil based friction polish to be dry food safe. Holes were filled with epoxy and coffee. Just one of the great tips I learned from here. Bowl was sold before I could part it off the lathe. Wish that would happen more often! LOL As always comments are greatly appreciated and hopefully I'll be able to respond better this time. ;)

Thanks for looking!

Spence


img

Re: Maple Bowl

#2

Re: Maple Bowl

Ed Kelle

>Is that bowl regular or decaf? ;)

Congrats on the nice bowl and it's $ale

Re: Maple Bowl

#3

Re: Maple Bowl

Jeff

>Very nice looking bowl. I have never heard of using coffee to fill a void. What kind of epoxy do you use? And how do you use the coffee, mix it with the epoxy I assume?

Re: Maple Bowl

#4

No, cream and sugar. Ha

Don Henthorn

>

Re: Maple Bowl

#5

Re: Maple Bowl

Spence in Rhode Island

>Thanks Ed. I use only Jamaican Blue Mountain coffee. ;) LOL Whats decaff???

Re: Maple Bowl

#6

Re: Maple Bowl

Spence in Rhode Island

>Thank you Jeff. I first heard of using coffee grounds here at WC. Some folks use CA but I prefer mixing it with 5 minute epoxy. First mix the grounds with the resin and then add the hardener. Save the good stuff for yourself and use the elcheapo coffee for the holes. ;)

Re: Maple Bowl

#7

LOL

Spence in Rhode Island

>