Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Frustration!

Posts

Frustration!

#1

Frustration!

Scott Hurley in N. VA

>I took delivery of my new Jet 1642 from the local Woodcraft store this afternoon, thanks to two neighbors. We got it home, out of the box, and into the basement with very little trouble. I cleaned up all of the cosmoline (or whatever they use), assembled the whole thing, put the new adaptor on my chuck, and was ready to go. One problem - I had read somewhere that the variable speed motor didn't like GFCI circuits. How true. As soon as I hit the switch, I heard the GFCI click off. Now I have to re-do at least one of the circuits in my basement, since all the circuits are GFCI protected. It looks like tomorrow before I'll be able to give it a try. AAUUGGHH!!

Re: Frustration!

#2

Re: Frustration!

dick mc neill

>I too got a Jet 1642 from Woodcraft this week. I had the same problem but fortunately another circuit worked. While you've got an electrician there see if you can by pass the annoying on/off switch. And check the spindle for very sharp burrs I got a very nasty cut on my index finger. But once you begin turning you'll be very pleased with the lathe.

Re: Frustration!

#3

Re: Frustration!

Scott Hurley in N. VA

>Dick,

I'm going to get the circuit fixed today. I also had some burrs on the spindle in the the little area behind the threads. However, I created them myself, since I didn't realize that the faceplate had setscrews (2!) in it. When I tried to take it off, of course it was tight, so I pushed a little harder, and it only moved about 1/2". It was only then that I noticed the little setscrew. I loosened the first one and tried again - still too tight. I finally saw the second setscrew and once I loosened that one, the faceplate came right off. The removal process did leave a couple of burrs behind. A couple of passes with a small file, and it's nice and smooth again. I'm looking forward to getting going in a couple of hours.

Have fun with your new lathe.

Scott

Re: Frustration!

#4

Question about the electronics

Scott Hurley in N. VA

>I replaced the GFCI receptacle and moved it downstream in the circuit, so at least the other plugs are protected. The lathe works like a champ. However, I noticed that the speed indicator shows '0' even when the lathe is turned off. Should I unplug it when I'm not using it? With the electronics box on the back, should I be using a surge protector? What do other Jet owners do about this? Thanks.

Re: Frustration!

#5

Re: Question about the electronics

John Lucas

>Scott I turn off the circuit breaker to my lathe when I leave. I had a friend who had his destroyed by lightening and that little box is expensive.

Re: Frustration!

#6

Re: Question about the electronics

Bill Howatt

>I have a General with electronic VFD. I try to unplug it after using in the summer which is the time we get virtually all of our electrical storms. Unplugging is the safest way since it is possible for a big strike to jump switch/breaker contacts.

Bill

Re: Frustration!

#7

JL

Re: Question about the electronics

JL

>I unplug it when not in use.

Re: Frustration!

#8

Re: Question about the electronics

Scott Hurley in N. VA

>Thanks for the quick replies.

Scott

Re: Frustration!

#9

Re: Question about the electronics

JimQ

>Mine isn't even electronic, but I unplug everything when not in use just for the safety factor in case someone else wanders in.

JimQ

Re: Frustration!

#10

Re: Question about the electronics

Barry Turner

>We have some pretty nasty thunderstorms and lightning in Kentucky so I not only flip the breaker, but also unplug my Stubby when I leave the shop. No need to take chances, when it's so easy to isolate the lathe from any possibility of a lightning-induced power surge.

Re: Frustration!

#11

Re: Frustration!

John U - Charlotte, NC

>hmmm....been there too. Didn't loosen the set screws. Same score marks on mine. GFCI circuit -- mine tripped too. put it on a regular circuit with no problems.

Re: Frustration!

#12

Ric Taylor

Re: Question about the electronics

Ric Taylor

>I have a Jet 1642 also. I have a power strip with a surge protector mounted on the side of the lathe, so that I can easily plug in drills, lamps, etc. I shut it all down when I'm not using the lathe.

Ric

Re: Frustration!

#13

Re: Frustration!

Rick Allen

>That is a very nice lathe! Now we expect to see the marvelous turnings you will be making on that beauty at the club meeting this coming Saturday.

Re: Frustration!

#14

Re: Frustration!

Scott Hurley in N. VA

>As soon as I finish remodeling the utility room for my wife (paint, new flooring, replace the broken door, etc... I've got the lathe working fine, but I have only had time to use it for a couple of hours so far. I'll keep trying.

Re: Frustration!

#15

Re: Frustration!

Ed Karch in No.VA

>Yo Scott tell the missus that house fixen is rainey weather work. You have to break in the lathe while the sun shines or else it will never run right. Hope to see you at the meeting.