Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

seg bowl diamonds

Posts

seg bowl diamonds

#1

seg bowl diamonds

gary clarke

>What is the best way to make diamonds for including in segmented bowls? I have tried several methods including: router, disk sanding, and sawing squares in half, and I am not satisified with the results.There always is a small asymmetry or a poor glue joint or a poor router joint, etc. Maybe I need to do a couple of dozen or so before they turn out. thanks for any suggestions.

Re: seg bowl diamonds

#2

Re: seg bowl diamonds

kevinT in T Bay

>I've used a mortiser for a few of my pieces. Just rotate the chisel..Cheers KevinT

Re: seg bowl diamonds

#3

Re: seg bowl diamonds

Mark Kauder, Phenix City, AL

>Laminate 3 strips of wood - diamond color in the middle, and then cut at an angle to create the diamond in the center strip, then laminate the another pair of blocks to totally enclose the diamond in one color.

It is harder to explain than it is to do.

Maybe this picture will allow you to imagine what I am talking about.

Mark


img

Re: seg bowl diamonds

#4

Re: seg bowl diamonds

kevinT in T Bay

>Your right Mark, Thank you..

Re: seg bowl diamonds

#5

Good book

kevinT in T Bay

>Gary, I just picked up my copy of "Woodturning with Ray Allen By Dale Nish....Great book.... shows examples of diamonds and every thing else... Guess what I'll be reading in ten minutes....Cheers Kevin T in T Bay

Re: seg bowl diamonds

#6

Re: seg bowl diamonds

gary clarke

>Mark, thanks, I will give it a try, looks good on paper if I have it figured correctly. Kevin, I also bought his book, looks good also. Great looking diamonds in your bowl.