Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

High speed carving tool

Posts

High speed carving tool

#1

High speed carving tool

Norm Smith in Nova Scotia

>There are two that I found on the net. Powercrafter at Craft Supply and Turbo II at another site. Both are air driven, etc. The turbo II is cheaper than the Powercrafter. Anyone have any expierence with one or both? How do they compair?

Thanks,

Norm

Re: High speed carving tool

#2

JL

Re: High speed carving tool

JL

>Might want to ask on the Woodcarving board. I do have a question though, what are the pros of an air driven carving tool? I have seen the electric shaft ones, but not the air.

Re: High speed carving tool

#3

Re: High speed carving tool *LINK*

albertabob

>Electric is usually slow speed (5-25,000 rpm) and take larger bur sizes. it better for lrge carving like birds etc.

Air is usually 350-400,000 rpm)

Electic has more torque at low speeds.

Air has more delicate cutting power at higher speeds.

Air can have one unit powering both high and low spped drills.

Electric can do this too but not in the hobbiests range.

Bob


high speed air uinit with hps - example

Re: High speed carving tool

#4

Re: High speed carving tool

Les Robison

>J Paul Fennel answered a question I sent him about the hi-speed air unit he used. Here is his reply.

Les,

The name of the handpiece is NSK Presto, a Japanese company that makes equipment for dentists and dental labs. Binh Pho from Illinois sells these. His email address is

toriale@msn.com . It costs more, but it is quieter and does not require oil.

Paul

Re: High speed carving tool

#5

Re: High speed carving tool

Darryl Hansen

>Oops I just posted a similar question over in Woodcarving. Have you seen the "stuff" in the "Wood Carver Supply" catalog? there are all kinds and I don't know what is best...Darryl