Follow-Up On North Respirator
Barbara Gill, Remlik VA
>I just spoke to a technition at North Safety Products. She said the dust filter I am using filters up to 0.3 microns. I think I will stick with my North. :-)
Knowledge You Can Build On — Est. 1998
Follow-Up On North Respirator
Barbara Gill, Remlik VA
>I just spoke to a technition at North Safety Products. She said the dust filter I am using filters up to 0.3 microns. I think I will stick with my North. :-)
Re: Follow-Up On North Respirator
Fog Tanner
>Barbara, Thats great news for your lungs since you've been using it for so long. With .03 filtration, you won't have to worry in this lifetime. Which one do you have. I have been thinking about something for my nonturning activities, mainly when I use the table saw. I think I am starting to develop some sensitivity to pine. I already have that for balsa dust. I talked to my allergist and mentioned the balsa wood problem. I found out that you can develop a sensitivity to any wood given enough exposure. I guess 25+ years of model airplane building was enough balsa dust for my body. Pine is next it appears, so I think I will look at one of those North respirators since it appears to work for you.
Thanks,
Fog
Re: Follow-Up On North Respirator
Barbara Gill, Remlik VA
>There are many companies which sell the North products. I have the 7700 Series Half Face Respirator
http://www.storesonline.com/site/603595/page/369663
and use the P100 filters for turning
http://www.storesonline.com/site/603595/page/369667
In the sawmill I use the N95 filters; they require holders and are not quite as efficient (95%). All of the fittings, harness, etc. are replacable. I just ordered some filters, etc. from the company above.
Re: Follow-Up On North Respirator
Fog Tanner
>Thanks Barbara, I'll take a look at those links.
Fog
Re: Follow-Up On North Respirator
David Ramer
>I got the same North #770030 Respirator on Ebay for $26 and included 2 HEPA filters... (only bidder... I.D. of seller is "abcobest" and has a 100% feedback)
I then got a case of 12 - North #7581P100 cartridges for a Buy Now of $30. (I.D. "c.spruell" with a 99.9% feedback)
No relationship other than seller and buyer... Both transactions were GREAT and I would not hesitate buying from either again.
When I saw the online prices of the cartridges at $15-$20, the 12 pack for $30 looked really good. Mask and filters work great... now I kick myself for not getting it years ago...