Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

The Good Old Days....

Posts

The Good Old Days....

#1

The Good Old Days....

Wally Dickerman in Arizona

>I was there.

Okay, you have a nice hardwood blank, 12 x 4 1/2 inches. You want to turn a salad bowl. But wait...it's 1980. The bowl gouge was invented in England in the 70's, but didn't reach the U.S. until after 1980, and didn't become popular for at least 2 or 3 years. So you have no bowl gouge. The 4-jaw chuck wasn't marketed until about 1990, so you don't have that. High speed steel isn't in general use for turning tools, so your tools are carbon steel. Tools available are for spindle turning anyway. You'll have to use those or make your own bowl turning tools. There aren't any videos. Books available are mostly on spindle turning. There are certainly no woodturning websites. If there are any clubs they're for general woodworking and seldom for woodturning. Lathes are constructed for spindle turning. No swiveling or sliding headstocks, no electronic variable speed, and very few have a swing of more than 12 inches.

Now tell me, how are you going to turn that salad bowl?

We've come a long way in 25 years.

Wally

Re: The Good Old Days....

#2

Re: The Good Old Days....

Curt Fuller

>Beautiful perspective Wally. Amazingly, all the modern inventions and improvements you've mentioned have also taken the salad bowl from a utilitarian piece to an art form.

Re: The Good Old Days....

#3

Re: The Good Old Days....

Russ Fairfield

>In 1970, I would have held the wood between centers, turned the outside with a tool that we now call a "scraper", and hollowed out the inside with a narrow scraper that was about 1" thick; or maybe I would have hollowed it out with a steel bar that had a piece of 1/2" HSS held in a hole in the end with a set-screw. Then I would have cut off the long center spigot, and smoothed the bottom with a wood chisel and a cabinet scraper.

I didn't sand bowls in those days because I could get a surface with the scraper that didn't need sanding. Come to think about it, it's still a good way to turn a bowl. Just so it isn't too deep.

The bowls I make now aren't any better. They are just faster.

Re: The Good Old Days....

#4

would have used a metal lathe

e

>... and then gotten screamed at!

Re: The Good Old Days....

#5

Re: The Good Old Days....

John Lucas

>Wally were you trying to describe me. No actually my first real lathe other than using a drill mounted to the bench was the shopsmith so I had a halfway decent lathe. All the lathes I could afford back then had minimum speeds of 500 rpm and were light weight. I spent a lot of time chasing them around the shop.

It was a long time before I could afford a chuck and turned everything on faceplates. Glad I did. I still use those techniques today.

Tools. Don't cringe. I used files and screwdrivers. Later I learned to heat treat the files to make them less dangerous. I turned all my early bowls with scrapers. I did finally buy a spindle gouge and would turn the outside and part of the inside with the gouge. My bowls always had a sharp turn from the sides to the bottom so I had to scrape the bottom.

I don't remember what sandpaper I used but I'm guessing somewhere between 24 and 80 grit. I still didn't sand out all the tearout. My mom has one of those bowls and even though it looks nice there is tearout in places.

My finishing was good because I came to turning from furniture making. I felt sanding and finishing seperated the Men from the boys so to speak so I spent a lot of time doing that. Besides my shapes sucked and I had to sand them into submission. It was a real revelation when I saw Clay Foster use a cabinet scraper. I already had a couple of those.

In that same demo (my first by the way) Rudy Osolnik showed his first bowl gouge. A rectangular piece of steel with a groove cut in the top and the bevel shaped kind of like we have today. I went home and built one. Used it for years until I bough my first Robert Sorby bowl gouge.

Re: The Good Old Days....

#6

Was there, did that.

Brian Hahn in SW Wisconsin

>Craftsman 12" steel tube bed lathe with speed reducer to bring the RPM down to a reasonably safe level. Used a spindle gouge and scrapers. Glued the foot to a waste block to turn the inside. That was mostly scrapers, and the finish was good if I didn't get a bad vibration. Hand sanding - no Velcro pads back then either. Then part the bowl off - the paper in the glue line never worked well for me.

I like my current set-up a whole lot better!!

Re: The Good Old Days....

#7

Re: The Good Old Days....

Bob Hackett

>You could always take the approach my older brother took.Get your younger brother the metalworker involved in turning so he would make tools,adapters,etc for you.

I think I mentioned it before but I got him hooked on metalworking to get back at him.Now if I could just get a small percentage of my tools back...

Mainely,Bob

Re: The Good Old Days....

#8

Re: The Good Old Days.... *LINK*

David Propst

>Hey Wally,

Yesterday I found the speech linked below by Ellsworth on "Early Woodturning Masters" while looking for some info on Rude Osolnik's candle sticks. It is good reading and fits in nicely with your post.

David


Early Woodturning Masters...

Re: The Good Old Days....

#9

Re: The Good Old Days....

Wally Dickerman in Arizona

>You're right David, it is good reading. I've been around the turning scene so long that I've met all of the men that Ellsworth writes about, including David himself. I consider myself fortunate to have known Rude Osolnik quite well. I visited him at his home in Berea, and he stayed with me several times when he was in Seattle.

As David points out, these pioneers of the types of turning that we know today, all started on their own. They had to make their own tools and came up with the techniques needed to do the style of turning that they wanted to do.

Wally

Re: The Good Old Days....

#10

Re: The Good Old Days....

Ed Karch in No.VA

>I have that bowl in my display case. Done in 1975 from California Laurel on a face plate with three screws (you can see the holes in the bottom). Not a true salad bowl as the outside is square not turned. More of a coffee table piece. Done on a Shopsmith with scrapers made from files. Finished with many layers of boiled linseed oil. Didn't turn another thing for 28 years.


img

Re: The Good Old Days....

#11

Re: The Good Old Days....

Wally Dickerman in Arizona

>There has been a virtual explosion in the number of people involved in woodturning since about the middle 80's. I give most of the credit for this to the creation of the bowl gouge. All of a sudden bowl turning became easy. (Compared to the methods and tools we used in the old days)

Most of my bowl turning in the old days was done with scrapers. I made a very good one out a car leaf spring. I took it to a blacksmith and had him temper it to hold an edge. (The price was a wooden bowl) A couple of the tools that I used, I still use in my turning today. Or copies of them. A 1/2 x 1/2-inch, long and strong scraper I use when hollowing the lower portion of some of my hollow forms. Hogs out wood fast and easy. A square nosed scraper, side ground for an inch on both sides is a very handy tool for many uses.

I used a faceplate for the bottom of the bowl. I later made a screw chuck, using a lag bolt, a piece of wood and faceplate. To finish the bottom, I usually shortened the foot a little and used a wood plug for the hole in the center. That was perfectly okay in those days. In fact in R. Raffan's book on bowl design there is a photo of one of my early-day pieces, showing the plug.

Wally

Re: The Good Old Days....

#12

Keith Tompkins

Re: The Good Old Days....

Keith Tompkins

>Good post, Wally. Here is a photo of a bowl I made with only a Craftsman spindle gouge. I had no idea what a bowl gouge was...

I started turning in high school, and continued while employed as a traditional cabinetmaker. I was making really strange cabinet pieces and turnings back in the early 70's....while at work in my spare time. My boss would walk past and shake his head in dismay! One day he called me into his office after observing one of my pieces. I though to myself.."O boy, I just got myself fired for goofing off on company time!" Instead, he made me his personal assistant!

I had no idea of the turning movement that was underway...I can only imagine if I did! When I saw the book by Ray Leier and Jan Peters, I almost fell off my chair!!


img

Re: The Good Old Days....

#13

Re: Hey- Wally, Poverty Ridge...

JamieDonaldson

>.....looks just about the same since Rude died. I spend a lot of time in Berea these days as the Pres. of KY Guild of Artists, and I drove another turner up to see what should be a shrine to turning, but it sure is sad to see it so quiet.

Re: The Good Old Days....

#14

Re: The Good Old Days....

Dave Peebles Lyons, Ohio!

>Hi Wally,

I had to drag the Raffan book off the shelf to check out your bowl bottom. It looks like a clean job to me. And I noticed Richard liked it too!!

I guess I have looked through that book a dozen times and never noticed your signature. And a very neat and clean signature it is...

For those who have the book, it is on page 86.

Thanks for reminding me how it was done before all the modern tools became available.

Best wishes,

Dave

Re: The Good Old Days....

#15

Poverty Ridge...

JKJ in East TN

>Do you know if Rude's son ever sold off all the wood? He told me a couple of years ago that he had 5 barns or so full and was in the process of making an inventory. He had only $$$ signs in his eyes. He took down my email and phone number but I heard nothing further.

BTW, my sister Ruth is a nurse in the area and said she spent some time with Rude with in-home care. She has pleasant stories to tell.

JKJ

Re: The Good Old Days....

#16

Re: Poverty Ridge...

JamieDonaldson

>Rude's son Joe is selling Rude's remaining turnings by Web, but much of the wood is either gone or going to waste sitting around.

Re: The Good Old Days....

#17

Re: Poverty Ridge...

Wally Dickerman in Arizona

>Once when Rude and his wife were visiting us I took them to one of my wood sources, a small sawmill north of Seattle. Rude spotted a spalted maple log that I'd had my eye on. He had them cut it up and ship it to Berea. Rude's wife Daphne said that it would just get put away with all of the other wood and that he'd probably never get any of it turned. He just couldn't resist pretty wood.

Wally

Re: The Good Old Days....

#18

Re: The Good Old Days....

Wally Dickerman in Arizona

>Dave, Richard wanted that piece so we made a trade. I have a Richard Raffan platter in my collection. It has 5 beads on the rim. I think that that got me started turning beads on some of my pieces.

Wally

Re: The Good Old Days....

#19

Re: Poverty Ridge...

JamieDonaldson

>Rude couldn't even resist ugly wood! He could and did make marvels from just about any ol' junk wood.