Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

MSC and ENCO

Posts

MSC and ENCO

#1

MSC and ENCO

Phil Joines Krum, Texas

>Anyone ever notice that MSC's and ENCO's web sites always seem to be down at the same time? Of course I'm usually looking at them at obscene o'clock!

Re: MSC and ENCO

#2

Re: MSC and ENCO

John Lucas

>Phil I have trouble finding things on their website. I will be looking in the catalog at something they have and do search and still not find it. I have been using www.travers.com They don't have as much stuff but usually have what I'm looking for.

Re: MSC and ENCO

#3

Re: MSC and ENCO *LINK*

Brian Hahn in SW Wisconsin

>Try McMaster-Carr. Their on-line catalog is incredible. They're a little more expensive than ENCO or MSC, but beat them on selection and quality.

No connection, just a catalog addict.


McMaster-Carr

Re: MSC and ENCO

#4

MSC bought Enco in 1997

David Barnett - Venice, Florida

>

Re: MSC and ENCO

#5

Re: MSC and ENCO

Rick Allen

>The thing I like about MSC is that if I order something tonight I will have it sitting on my door step when I get home from work tomorrow. I don't know how they do that. More curious is that it will take 2 - 6 days to get something from other places.

Re: MSC and ENCO

#6

Re: MSC and ENCO

Phil Joines Krum, Texas

>Actually I don't have any problems with either of them. I was just curious about the coincidence with their web sites, turns out it isn't.

MSC is fast because they have warehouses scattered all over the country. They ship from whitch ever is closest.

Re: MSC and ENCO

#7

Re: MSC and ENCO wheel question

Jill

>Can anyone help me out. I have been looking in HUGE MSC and Enco catalogs for a sharpening/griding wheel. I can not find one that is a white wheel, 100-120 grit with a 5/8 hole. This was the recommended to me for sharpening my gouges. Do all grinding wheels come with inserts to change the hole sizes or do you have to order the right size? I can't find a 5/8. I have looked everywhere for this item. Any suggestions as to where to get it would be greatly appreciated.

Re: MSC and ENCO

#9

Re: MSC and ENCO wheel question

Juergen

>I just checked the link I posted above. and it takes you to Page 1 of the grinding wheels. Goto Page 5-7 for what you need.

Re: MSC and ENCO

#10

Re:The wheels linked are only 6"dia, right?

Al Crandall- NE of Indy

>