Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Green Aromatic Cedar

Posts

Green Aromatic Cedar

#1

Green Aromatic Cedar

Carole in VA

>All of the Eastern Red Cedar I have turned so far has been dry. Yesterday I got a trunk section of a huge cedar that had blown down in the high winds last week. I know it's green because the tree was alive and healthy, but I don't see much difference between the slabs I have cut from that and the dry stuff I have turned before other than a tiny bit of sap oozing at the bark line. It's not wet like normal "green" wood. Do I need to treat it like I would green wood? Has anyone used alcohol on red cedar? Should I just anchorseal the slabs and let it sit for 4 years? Rough turn it and seal? Rough and DNA soak?

Re: Green Aromatic Cedar

#2

Re: Green Aromatic Cedar

Tom Sontag - St. Louis

>ERC is kinda wierd IMO. It seems to grow already dry, which is anouther way of saying there is very little moisture to lose. Next to mesquite is the most stable domestic species I know of, so I would just have at it as is. I have never seen the need to anchorseal this species. Very forgiving.

Re: Green Aromatic Cedar

#3

Re: Green Aromatic Cedar

Michael Stafford

>Carole, I have used alcohol on green red cedar with great success. I have only turned 3 pieces of cedar so I am not the ultimate authority but I used alcohol on them all. Works for me!

Re: Green Aromatic Cedar

#4

Re: Green Aromatic Cedar

Jim Ketron

>I have used DNA on cedar and have had good results. Cedar is really bad for checking IMO so I compleatly seal the entire blank and rough turn it ASAP.

Re: Green Aromatic Cedar

#5

Re: Green Aromatic Cedar

Gary Evans Tallassee, TN

>Hi Carole,

According to Bruce Hoadley, ERC heartwood has an average green moisture content of 33%. That makes it a relatively dry green wood. Black cherry is 58%, Sugar maple is 65%, Black walnut is 90%, Sycamore is 114% and Cottonwood is 162%.

My experience has also been that the wood is quite stable, but it does have a tendency to end check when left in the log. I would treat it just like any other green wood, by anchorsealing the endgrain. Alcohol treatment, boiling or just drying slowly after roughing is at your discretion.

ERC is one of my favorite woods, I guess because it smells so good. It does seem to dull your tools quickly. I always have to sharpen the chainsaw a lot when I'm cutting cedar.

Gary

Re: Green Aromatic Cedar

#6

Re: Green Aromatic Cedar

Chip Peterson

>I'm curious, How can cottonwood and sycamore be more than 100%? What is it >100% OF? I've seen this type of citation previously, but have been (I guess) to lazy to ask!

Re: Green Aromatic Cedar

#7

Re: Green Aromatic Cedar

Ed Karch in No.VA

>moisture content is the ratio of the weight of waterin the wood to the weight of oven dry wood. Oven dry is wood dryed with a small amount of heat untill repeated weighing no longer loose weight. Example Wood weighs 20 grams before drying and 10 grams after.

10 water/10 woodx100=100% moisture content.

Re: Green Aromatic Cedar

#8

What Ed said!

Gary Evans Tallassee, TN

>

Re: Green Aromatic Cedar

#9

Re: Green Aromatic Cedar

JKJ in East TN

>Green cedar seems to be prone to end grain checking while turning or sanding as well. Some people I know have had such bad experiences they avoid it. I've noticed more trouble if I get it hot while sanding. Cabinet scrapers help here.

Cedar sure smells great while working, doesn't it? I usually apply beeswax finish to let the smell come through as long as possible. I also like the soft look of beeswax. I very much dislike finishes like oil and poly that soak into the wood and turn it dark purple/red like the things they sell by the truckload to tourists around here.

JKJ

Re: Green Aromatic Cedar

#10

Re: Green Aromatic Cedar

JimQ

>30+ years ago when I was doing tree work in NJ, we used to split green cedar, and it was dry enough for firewood in 3-5 weeks.

JimQ