Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Wenge foot bowl

Posts

Wenge foot bowl

#1

Wenge foot bowl

John Lucas

>Here's a bowl I just finished. Maple with carving on the rim done with a Ryobi reciprocation carver. I added Wenge feet cut out on the scroll saw.


img

Re: Wenge foot bowl

#2

JL

Re: Wenge foot bowl

JL

>Are the feet attached?

Re: Wenge foot bowl

#3

Re: Wenge foot bowl

John Lucas

>The feet are attached. I milled a rabbit in the bottom of the bowl. Then I glued them in with CA but that was just to hold them in place. I drilled 2 holes at opposite angles to each other and put in brass pens.


img

Re: Wenge foot bowl

#4

JL

Re: Wenge foot bowl - Thanks for sharing

JL

>

Re: Wenge foot bowl

#5

Re: Wenge foot bowl

Scott Hogsten

>John I really like the concept and I like the subtle texturing of the rim. To my eye though there is something that seems a little out of balance. At first glance the feet seem a little heavy to me. It is always hard to judge a piece from a photo as this could be an illusion caused by the angle of the photo. However, looking at this I notice that my eye is immediately drawn to the grain of the foot nearest the camera. I wonder how an ebonized foot would look ? Or perhaps slightly narrowing the thickness and decreasing the overall length of the foot along with ebonizing ? Anyway I still like the piece so if you want to send it to me I would be more than willing to accept it

Scott

Re: Wenge foot bowl

#6

Re: Wenge foot bowl

Ed Kelle

>Really nice John. I like the the feet you made, are they glued on? The carved rim is a nice touch also, I know how much work this requires. Great job!

Re: Wenge foot bowl

#7

Re: Wenge foot bowl

John Lucas

>Scott That's exactly what I told my best friend. I thought the feet were too wide, for 2 reasons. One is they just look too wide. The other is that I didn't cut the rabbit on the bowl the full width of the foot so part of it sticks out. I liked that when I made the decision to let the leg overhang the rabbit but after I got the bowl completed I thought the feet should be narrower, both from a visual standpoint and from the way it sits on the bowl.

Re: Wenge foot bowl

#8

Re: Wenge foot bowl

Jim King

>I really like the feet. This is a must try to copy.

Re: Wenge foot bowl

#9

Re: Wenge foot bowl

JKJ in East TN

>John,

Very interesting idea. It also struck me as a bit unbalanced, then I thought of something - the hard straight lines of the feet contrast with the curved bowl but maybe a bit too much. I wonder how it would look with slightly curved feet of perhaps the same arched design, but curved outward when viewed from the bottom. Perhaps give it a bit of an oriental flavor?

Good contrast in the woods. I just roughed a bunch of maple and am looking forward to when they are dry.

JKJ

Re: Wenge foot bowl

#10

Re: Wenge foot bowl

John Lucas

>Jim Feel free to copy. I was trying to copy a japanese style but it was from my head. I should have made a mock up to get a better feel for the sizes.

Re: Wenge foot bowl

#11

Re: Wenge foot bowl

John Lucas

>John I think feet that have the same curve as the bowl might work well also. It would be a totally different "feel" but would probably work better.