Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Speaking of Wands...

Posts

Speaking of Wands...

#1

Speaking of Wands...

Mike in Fort Walton Beach, FL

>Well, I've decided to focus my learning on wands (and by extension, spindles) for the time being given the soon to be released movie. I'm not overly impressed with my early efforts after the work I have seen here but I did get an order for one after the guy saw a wand I made for a fellow woodworker who gave me a lot of practice stock. So now I have my time down to one to one and a half hours per wand (I know, I'll be in the shop forever if I don't pick up the pace a bit) and am wondering how I would go about presenting the idea to a large local theater of having me out there doing a demo on wands and trying to sell some at the same time. I should also mention that the theater is a large complex but it is part of a much larger shopping plaza and they only lease the property as far as I know. Anyone know how I might go about this and who to ask? Also, should I renew my business license, charge sales tax, etc...? I would appreciate any info or war stories that might relate.

Thank you,

Mike in Fort Walton Beach, FL (now Navarre, FL and I keep forgetting to update my profile)

Re: Speaking of Wands...

#2

Re: Speaking of Wands...

JKJ in East TN

>For the book release, I simply went into the bookstore and talked to the manager. The person in the first store was rude and said they had everything covered, goodnight. The second store said sure but I had to convince them that turning small sticks was a safe activity and no customers would be slaughtered. They advertised on the radio, gave me a spot on the sidewalk just outside the door, and provided power. (The power was helpful!)

In my case, I turned wands for four hours while people waited and went to and from a children's event in the store. I sold every wand I took and every one I could make. I had prepared a number of blanks in advance - trimmed a little of the width with the bandsaw on the shaft end and preturned a morse taper on the handle end. I even preturned some to cylinders to save time. I let the kids pick out a piece of wood and describe the kind of shape they preferred. Surprising, the (eastern red) cedar blanks were among the first to be picked (and were quick to turn being so soft!)

I had kids and parents crowded around every minute of the evening. Good fun! I even got 4th of July style "ooo's and ahh's" when the shavings flew.

I considered approaching a theater for the movie but I don't think I'll have the time with my current workload. Also, I imagine the theater will be a very different environment from the store. Unless the theater complex is large enough to have multiple showings staggered throughout the evening, people will mostly be coming and going in relatively short time intervals between shows with possible dead times between (except for the teenagers "hanging out"). Most will be in a hurry before the show but perhaps might hang around some afterwards. In this case, I think having a large stock made in advance for quick sales would be best if you are interested in making money. I did it mostly to interact with the kids, so the selling was not as important.

As for convincing the management, I would take samples of precut blanks and finished wands to show them and suggest that they could get some great PR to help draw customers to their theater (assuming they didn't have a monopoly in your area).

If you end up doing this, you might want to plan on having at least one person to help. I had two, one watching the "store", and one talking to customers and taking orders for wands I couldn't finish that night. Make sure you have cards made up for future contact. I didn't and had to write them out by hand. I was surprised at the number of people who called later - in fact I got a call this afternoon for two last-minute wands for Halloween.

In addition to making sure you have power, don't forget to consider the environment, for example the amount of space you will need for the lathe and table and toolbox (don't want any sharp tools left within reach of inquisitive kids). The spot I had at the store was under an overhang which would have been helpful if it had rained. I knew it was going to be relatively dark, so I made a light for the lathe. I tapped threads in one of the mounting holes on the jet mini, inserted a piece of threaded rod, then and fastened a swingarm lamp on top of a 2' high steel tube fastened to the threaded rod.

JKJ

Re: Speaking of Wands...

#3

Re: Speaking of Wands...

Dave MacLuskie in Virginia

>I've been making wands, but have been hesitant to sell them to anyone other than friends and co-workers. I can just imagine some horrendous law suit when a kid runs around with a wand and trips (or hits his brother). It's not like they can't, and don't, do that with sticks already, but forests don't have a lot of cash (well, neither do I, but probably more than a random tree). Perhaps I'm being overly cynical of society.

They're great fun to make though!

Re: Speaking of Wands...

#4

Re: Speaking of Wands...

Mike in Fort Walton Beach, FL

>Thanks for the input guys. I'm not too worried about getting sued. I think that if I don't sell to anyone under the age of 16 without parental permission I should be fine. I imagine that if I can pull it off, most of the kids wouldn't be carrying around the extra ten to twenty dollars so I think it'd be mostly parents (or at least adults) that buy the on hand stock and kids that would have to pre-order if their folks aren't there. I can probably custom print my receipts with a disclaimer attached to cover my butt from people that love to sue. Anyhoo, thank you for all the help again!

Mike

Re: Speaking of Wands...

#5

Re: Speaking of Wands...

Robert Savit

>I have done just what you want to do. I have a deal with a local multiplex to set up in the lobby and make and sell wands during the first HP weekend. I must say, it's driving me crazy. I'm trying for 500 made up before, but I'm way short (about 200 currently).

I just called the manager and he was very excited about the idea. This theater is having some other events the first night--games for the kids, etc, so the idea of a wand shop fit right in. I think you just need to call and see what the reaction is. I also called another multiplex--part of a big chain, and was referred to their NY headquarters. I didn't pursue it, because I could just see the red tape coming.

In any event, I think it will be fun. I've made up a name for the wand shop, trying to give it an English/magical panache. My other justification for doing this was to finally force myself to become moderately proficient with a skew. I do think all the practice has had some positive effect. It's also an interesting experiment in self discovery to see how you react to real production turning.

If I can answer any other questions, let me know.

Good luck,

Bob Savit

Re: Speaking of Wands...

#6

Re: Speaking of Wands...

JKJ in East TN

>>I'm trying for 500 made up before

Yikes, that's ambitious! You can order a new Oneway lathe! The enthusastic public snapped up every one I had or could make at $10-$35 each (the more expensive were mostly exotic wood).

Maybe you could get some fellow turners or club members to make wands.

JKJ