Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Spinning Wheels

Posts

Spinning Wheels

#1

Spinning Wheels

ThomD

>I'm interested in sites, or other resources, for making spinning wheels. I'm interested in stuff that is spinning driven, rather than just stuff a woodworker would want to build. My wife wants a wheel, but isn't an expert on the subject, so what I need is plans or info for real useable wheels. I have one book on making wheels, and a few spinning books.

A lot of the traditional wheels don't really spin modern yarns. I could design my own between the plans in one book, the specifications of modern wheels, but if someone has already done the work... While my emphasis is obviously wood, turning, or green wood techniques, I'm open to PVC, metal, or bubblegum wheels if they get her spinning while I work on a wooden one. I'm only interested in making, not buying.

Re: Spinning Wheels

#2

Re: Spinning Wheels

John Lucas

>Tom I beleive I have plans for a spinning wheel in one of my books or magazines. I won't have time to look until thursday or Friday. If no one else has come up with something for you by then I'll get to work. John

Re: Spinning Wheels

#3

Re: Spinning Wheels *LINK*

Phil Joines Krum, Texas

>UNDERSTANDING THE SPINNING WHEEL by Eric Corran is by far the best. At $80 it's pricey but it's also a BIG book and goes into the theory the parts.

There are lots of other sources, just search for "spinning wheel plans".

We spent a fair amount of time looking into building one and made a wheel as a test, an interesting experiment, but ended up buying one.

There are lots of spinning and weaving devices that are fun to build.


The Woolery

Re: Spinning Wheels

#4

I agree !!! ..

Fred in NC

>Pricey, but the best information on spinning wheels that I have found.

I had the pleasure of stopping by at The Woolery in one of my trips, and looking at their spinning wheels and other stuff. That is where I saw the book, and of course, bought it.

They also carry a couple booklets with plans to make different kinds of spinning wheels.

After I retire at the end of this year I am planning to start on my first spinning wheel. That is one of the projects that I have had to postpone.

Hopefully I will also be able to post pics of some of my work.

Re: Spinning Wheels

#5

Re: Spinning Wheels

ThomD

>I haven't heard of that book. I will check it out. I have quite a bit of info on the classic wheel, and as a turner, that is my area of interest. I have started building a Shaker wheel from Bud Kronenbur'g book

As a hack machinist, and for my wife's interest in spining, I think I will nock off an upright wheel first. Soul destroying, I know, but some of these manufacturers actually boast about using MDF for the wheels!

FWW 63 has a nice modern looking wheel, with detailed plans, and a hardware supplier. Of course that was almost 20 years ago.

I have a German woodturning book, that had a beautiful upright in it. That at least shows what can be done with the form. Can't find the book yet.

What I really looking for though are sites of people who have gone completely nuts about turnning wheels. or making them out of bottles, or tires. You know the usual over the top stuff yuo find on the web. So far I have found only one lady's site for a pvc handwheel, not a single other site where an amateur is building a wheel. Pretty extraordinary for such a rich field.

Re: Spinning Wheels

#6

Re: Spinning Wheels

ThomD

>Thanks for the offer. What I am looking for is sites etc... or qualified plans. I am a little worried about the plan packets out there since there isn't really any basis for knowing how accurate or useable they would be for a modern spinner. I'm surprised that so few people seem to have tried this project to create a real spinning wheel.

Re: Spinning Wheels

#7

Re: Spinning Wheels

Phil Joines Krum, Texas

>I didn't find anything like that either. For me it would have taken more time than I had.

Re: Spinning Wheels

#8

Spinning Wheel Plans *LINK*

Stuart Johnson

>I did a quick google search using: plans spinning wheel

and got around 16,000 hits.

Here is a nice looking one.


spinning wheel plans