Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Just Returned from OVWG Turning 2005 *LINK*

Posts

Just Returned from OVWG Turning 2005 *LINK*

#1

Just Returned from OVWG Turning 2005 *LINK*

Mark Kauder, Phenix City, AL

>I got back last night at about 8:30 (8+ hour drive each direction, 605 miles door to door) from a really nice Symposium - The Ohio Vally Woodturners Guild Turning 2005. The featured demonstrators were a Who's Who of turning - Jimmy Clewes, J. Paul Fennell, John Jordan, Ray Key, Richard Raffan, Chris Ramsey, Chris Stott, as well as many Guest demonstrators including Lyle Jamieson, fellow WC member Jamie Donaldson, and your humble correspondent - Me.

The symposium was held on a church retreat center that included dormatories, and a dining facility that served all 240+ participants three good, hearty meals a day, as well as cookies for morning and afternoon stacks (cinnamon rolls on Sunday morning). I parked my car on Thursday afternoon when I got there, and did not have to move it until noon Sunday when I left.

I got to see many On-Line friends like Al Crandle, Jamie Donaldson, Ruth Niles, and many more too numerous to mention, lest I forget someone.

There were 6 classes per rotation. Each day, Friday morning though Noon Sunday, there were 6 seventy-five minute demos first thing in the morning and last sessions of the afternoon. These were conducted by the guest demonstrators. Between those, were 2 two and a half hour demonstrations (Seperated by a 90 minute lunch break) conducted by the Featured demonstrators. Those long demonstrations allowed the demonstrators to get much deeper into their subject matter than shorter rotations an many symposia.

The symposium was limited in the number of people allowed to register, so the demos were kept small enough (about 50 people) to be able to see and hear.

Some of the rotations were not as popular as others - namely the slide shows that many of the Featured demonstrators did for one rotation. But as a result, for instance, I was able to set in a room and watch a show and explaination by Richard Raffen of his work, with just 5 other guys. Really a good chance to talk to a master turner.

I was given the last time slot (75 minutes) on Friday afternoon for my demonstration. I got that slot because I told them that there was no way I could present my demo on Segmented Turning and Finishing in that time. I have never done it in less than 2 hours. So with this time slot I could run long. I did run long, I took at least 2 hours (slides and speaking, no real demonstration) and I was very gratified to have about 60 people stay for the whole thing.

Though it was nice to finally see the likes of Ray Key, Richard Raffen and Chris Stott - I was blown away by the demos I saw by Jimmy Clewes. His is right up there with Stuart Batty, in my opinion, for the quality of his demos. Fun, exciting (turning a square bowl/box at 3300rpm). He really knows how to explain what he is doing, how it is done, and why he does it that way.

One of the real highlights for me was at the auction Saturday night, where they were auctioning donated items for their educational fund, and for Katrina relief. First off, I got there late, and it turned out I have been drawn in the Raffle for a Scholarship for a week at Arrowmont, but you have to be there to win. Oh well....I don't know how I could have gotten away for a week of turning and still kept my wife. ANYWAY, about half way through the auction (it ran almost 3 hours), I saw Ruth Niles off to one side and went over to talk to her. She asked what I was doing, and I told her I thought I would leave. She said that some people were setting over in the vendor area talking and why don't I join them. So I did. Low and behold, there was John Jordan, Chris Stott (later), Ray Key, Richard Raffen, Ruth, J. Paul Fennel, and Kevin from Oneway just setting around shooting the breeze. Everything from Travel, to domoing, to where they were going to go to get a beer. Really great to see another side of these guys.

ANYWAY, it was a good weekend (sold two bowls that I had in the instant gallery), though tiring.

This symposium is held every two years. You should consider it.

Mark


http://www.ovwg.org/turning2005/index.htm

Re: Just Returned from OVWG Turning 2005 *LINK*

#2

Re: Just Returned from OVWG Turning 2005

David Galloway

>Thanks for filing that report, Mark. Sounds like a stellar group, including yourself. I will take a look at it in the future. Glad you had a great time. I know that others benefitted from your work.

David

Re: Just Returned from OVWG Turning 2005 *LINK*

#3

Re: Just Returned from OVWG Turning 2005

Ed Moore

>I concur with Mark's evaluation of this excellent symposium. I enjoyed meeting Mark, Jamie, and Ruth and generally had a fine time.

Prior to arriving at Higher Ground (the facility) I had wondered how a young turner like Jimmy Clewes would stand up to the likes of the list of presenters that Mark mentioned. Well, my concerns were needless because at the end almost everyone felt that Jimmy was the hit of the event. He TAUGHT everything he did and taught it well. The Chinese box that he turned at 3300 RPM sold for over $500 at the auction. His platters that he colored went high also. I think that the sky's the limit for Jimmy. If you get a chance to attend one of his demonstrations, please do it.

I took two boxes to sell and sold four. Several people chided me for pricing too low. Since I didn't expect to sell any, I was pleased to get $36 each.

I applaud the efforts of the OVWG group who worked so hard to put on such a high caliber event. The 2005 Symposium is going to be hard to improve on.

Ed

Re: Just Returned from OVWG Turning 2005 *LINK*

#4

Re: Just Returned from OVWG Turning 2005

JamieDonaldson

>Very strange- the 2 turnings I purchased for my collection came from these 2 posters!!?? Now I can see an example of how far I have to go to polish a shiny surface like Mark, and Ed gave me a good example of a finishing technique that I can try in the future. It was a very good weekend, and I certainly recommend it to other turners of all skill levels.

Re: Just Returned from OVWG Turning 2005 *LINK*

#5

Re: Just Returned from OVWG Turning 2005 *LINK*

Lowell Converse

>Here's a link to some photos from the symposium.


http://www.ovwg.org/New-OVWG-Site/Activities/Turni

Re: Just Returned from OVWG Turning 2005 *LINK*

#6

Re: Just Returned from OVWG Turning 2005

Dave Peebles Lyons, Ohio!

>Thanks Lowell,

Those are some great pics!! It looks like you had a great time, as always. I am bummed that I missed this one, but I will be sure to be at the next one.

Dave