Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Removing wax

Posts

Removing wax

#1

Removing wax

Wayne Cease, Atlanta

>I have a maple burl that is sealed in wax. I need to remove the wax from the spikey burl cap. I want to leave that end the way it is, but without the wax. The other parts I can cut, sand or turn off, but not

the spikey part.

I did a quick search on the site, but didn't find post. Maybe I didn't go far enough back in time.

Thanks,

Wayne

Re: Removing wax

#2

Re: Removing wax

Sean Troy

>Pressure wash at the car wash works well.

Re: Removing wax

#3

Re: Removing wax

Brian Hahn in SW Wisconsin

>Try paint thinner / mineral spirits and scrub with an old tooth brush. Other solvents like lacquer thinner will work as well, but the fumes are more hazardous to breath.

Re: Removing wax

#4

Re: Removing wax

Juergen

>Heat Gun, like one would use for paint stripping.

Re: Removing wax

#5

Re: Removing wax

JimQ

>That can melt the wax right into the pores of the wood. Pressure wash warms it and blows it away at the same time.

Dish detergent, a brush, hot water, and elbow grease works too.

JimQ

Re: Removing wax

#6

Re: Removing wax

Rick in Colgate, Wi

>We have one of those small steam cleaners that are used for cleaning showers and sinks in the home, that may work tho I never tried it to remove wax, will give it a try on anchorseal to see what it does.

Re: Removing wax

#7

Re: Removing wax

JimQ

>Might help to spray on some detergent after the first pass and let is soak before doing a second pass. Also, watch what is beyond the spray pattern, you don't want to have to clean the whole side of your house.

JimQ