Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

2 part christmas ornament

Posts

2 part christmas ornament

#1

2 part christmas ornament

John Lucas

>I am supposed to to do a 2 part christmas ornament for our club on Wednesday. I don't usually do demos on something I haven't made but they wanted it done and Bobby Clemons is going to be out of town. He is our 2 part ornament Guru. We learned these years ago from Larry Hasiak.

I have made 3 this week. They are ugly. Have any of you made these and do you have a photo. I am going to try to look up an article in the magazines to see if anyone has one published. I'll make some quick photos later tonigt. I plan to sit down and try to draw a better design and build another one tonight. This is a challenge.

Re: 2 part christmas ornament

#2

Dick Hines

Re: 2 part christmas ornament

Dick Hines

>John, get the book by Dick Sing. His bird houses are great.

Re: 2 part christmas ornament

#3

Re: 2 part christmas ornament

Curt Fuller

>Here's a 3 part inside out ornament I turned for WR challenge a while back. I have instructions too but I'n not sure how to post them.


img

Re: 2 part christmas ornament

#4

Re: 2 part christmas ornament

John Lucas

>I've seen and turned the birdhouses Dick Sing makes. This one needs to be more like a traditional ornament.

Re: 2 part christmas ornament

#5

Re: 2 part christmas ornament

John Lucas

>Curt Nice ornament. I've made a lot of inside-out ornaments and other inside out things. I just finished the inside-out wine bottle with Goblets as the silhouette.

Re: 2 part christmas ornament

#6

Re: 2 part christmas ornament

John Lucas

>I guess I wasn't clear enough. These are ornaments made by turning a cylinder, cutting it in to two parts. Hollowing a little of both parts and putting it back together. Then you turn the outside shape. It's just the outside shape or design of the outside shape I am having problems with. I would like to see what others have done if you've done this style.

Re: 2 part christmas ornament

#7

Re: 2 part christmas ornament *LINK*

John U - Charlotte, NC

>John -- here's Larry Hasiak's article on the 2 part ornaments. These ornaments are different compared to other hollowed ornaments, and require a larger starting piece of wood (since it starts as one block, and the finial is made from the same wood), but the hollowing technique is greatly simplified. I would think that these ornaments would be a good "canvas" for coloring, carving, or pyrography.

Good luck with your demonstration.


Larry Hasiak - 2 part ornaments

Re: 2 part christmas ornament

#8

Re: 2 part christmas ornament

Brian Hahn in SW Wisconsin

>I've made them like a traditional hollow ball ornament with very short finial. Also a more elongated shape like you often see for glass ornaments. Nothing fancy at all, except maybe the wood.

Re: 2 part christmas ornament

#9

Re: 2 part christmas ornament

John Lucas

>Thanks John I found his article in American Woodturner vol 16 late last night. His shapes are too much like regular ornaments for me although I like the order in which he hollows. It reduces the mounting and dismounting by one step. John