Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Turning Magazine recommendations?

Posts

Turning Magazine recommendations?

#1

Turning Magazine recommendations?

Carole in VA

>Most of my mags are geared towards flatwork and since my inclination is now towards turning, I figure it is time to re-focus my reading material. The only dedicated turning mag which I currently receive is Woodturning Design. I am looking for suggestions for others since I have no newstands where I can browse. I am a beginning turner.

Re: Turning Magazine recommendations?

#2

Re: Turning Magazine recommendations?

Rick Allen

>Hi Carol

"American Woodturner" is a quaterly publication of execlent quality. It comes with your membership in the AAW.

"More Woodturning" is Fred Holder's publication. This publication has improved a LOT over the years. And Fred advertizes here at Woodcentral.

"Woodturning" is a monthly publication from England. This is an ezeclent publication but pricy due to the importing cost.

"Woodworking at Home" is a DVD magazine that comes every couple of months which contains a nice article (vedio) with Dick Sing on some aspect of woodturning.

Richard

Re: Turning Magazine recommendations?

#3

Dick Hines

Re: Turning Magazine recommendations?

Dick Hines

>Carole here a few I get. More Woodturning, Woodturning. Expencive but I look forward to getting it each month. It's out of the UK. You could always join the AAW. Some on this page don't care for it but It has some useful info some times.

Re: Turning Magazine recommendations?

#4

Re: Turning Magazine recommendations?

Carole in VA

>There really don't seem to be too many out there dedicated to turning. I plan on joining AAW in January so I will be getting that. Will take a look at the two you suggested.

Re: Turning Magazine recommendations?

#5

Keith Tompkins

Re: Turning Magazine recommendations?

Keith Tompkins

>Carole, by all means join the AAW. The magazine is worth the cost alone. Visit your local Barnes and Noble, read through the turning mags....decide which you like.

I think the next issue of Woodturning Design will be an especially interesting one.........he he.

Re: Turning Magazine recommendations?

#6

Re: Turning Magazine recommendations?

Barry Turner

>You don't have too many choices. I'm a member of AAW so I get "American Woodturner". I usually pick up "Woodturning" at Woodcraft. The last time I was there, I couldn't find the magazine.

I asked about it and was told, "Well, it's too expensive, all the ads are for stuff that may not be available in the USA and all the prices are all in British pounds, so you can't comparison shop."

"Yeah, well, so what's your point? If you had one, I'd still buy it, but you don't, so I can't." I now buy them at Barnes-Noble bookstore. Despite those shortcomings, it really is a good magazine.

Re: Turning Magazine recommendations?

#7

Re: Turning Magazine recommendations?

JimQ

>Barnes & Noble told me last week that they were no longer carrying Woodturning Design. It didn't sell enough for the shelf space it took up across the country. They were the only place around that carried it.

JimQ

Re: Turning Magazine recommendations?

#8

Re: Turning Magazine recommendations?

Carole in VA

>So...in the next issue are you going to give a step-by-step on how you did the "Twisted Sisters"? ;) (Along with Molly doing her branding.) It's nice to get a mag where I see familiar names and faces.

Re: Turning Magazine recommendations?

#9

Re: Turning Magazine recommendations?

Nick Tuzzolino

>Carole: The best mag without a doubt is Woodturning, from the UK. The cost through Rob Cosman, robcosman.com , ph 877-967-5966, is $99 for two years. A real bargain. Nick

Re: Turning Magazine recommendations?

#10

Re: Turning Magazine recommendations?

Marc Burt

>I don't know where you're located but here in NE Georgia I buy Woodturning Design at Wal-mart. My local grocery store also sells it. Just FWIW

Re: Turning Magazine recommendations?

#11

Re: Turning Magazine recommendations?

John Lucas

>Simon Whiteheads humorous articles are worth the price of woodturning magazine. I was rolling in the floor reading about how dust stays on your body no matter how hard you try to get it off until it is attracted by the carpet in your house.

Re: Turning Magazine recommendations?

#12

Re: Turning Magazine recommendations?

Craig Daymon

>Most of my mags are flatwork oriented as well.

As others have said, join AAW so you can get American Woodturner (if you don't belong already). I'll probably start subscribing to Woodturning (the UK mag) soon.

My favorite magazine right now, flat or round, is Woodwork. It always seems to have at least one article on turning and frequently features articles related to carving. Mostly I find this magazine very inspirational. It is also very reasonable for the quality.

I'm a confessed woodworking magazine junkie, so I subscribe to quite a few, though I have dumped American Woodworker recently. I thought about dumping Wood, but when I called recently they offered me 3 years for $25(+/- $1). Woodcraft looks nice, but I don't think it's worth their asking price. Best flatwork value mag, I think, is Popular Woodworking. Even their web site has a boatload of free info.

Sorry, not much help and lots of rambling.

-Craig

P.S. America Router will feature an article on using trim router on a lathe, including a jig for doing so in the next issue.

Re: Turning Magazine recommendations?

#13

Re: Turning Magazine recommendations?

Carole in VA

>Nick, that is a good deal considering it is $84 for 1 year on Amazon, but right now I can't fork out $100 for a mag subscription.:( Maybe next year...sigh.

Re: Turning Magazine recommendations?

#14

Keith Tompkins

Re: Turning Magazine recommendations?

Keith Tompkins

>Not yet! Form and Design! Let me know what you think!

Re: Turning Magazine recommendations?

#15

Re: Turning Magazine recommendations?

JimQ

>WoodCraft Magazine is free for one year if you spend $100 in the store or (I think) online. Can't beat that price.

JimQ

Re: Turning Magazine recommendations?

#16

Re: Turning Magazine recommendations?

George Van in WI

>I took Nick's advice and renewed through Rob Cosman. Friendly people and the price was as stated. Thanks for the savings Nick!

Re: Turning Magazine recommendations?

#17

Re: Turning Magazine recommendations?

Carole in VA

>Hmmm...I just spent $500 in the Woodcraft in Norfolk last month and I didn't get the magazine! Not even a complimentary copy!

Re: Turning Magazine recommendations?

#18

Re: Turning Magazine recommendations?

JimQ

>I think it started October 1.

JimQ

Re: Turning Magazine recommendations?

#19

Re: Turning Magazine recommendations?

Brian Hahn in SW Wisconsin

>I spent $120 yesterday and didn't get anything either!

Re: Turning Magazine recommendations?

#20

Re: Turning Magazine recommendations?

Carole in VA

>Just my luck. :(

Re: Turning Magazine recommendations?

#21

Re: Turning Magazine recommendations?

JimQ

>Thursday I got signed up after a $130 purchase at the Chandler, AZ store. They had a sign on the counter and I had to ask for it.

JimQ