Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Elm Burl Vase (pics)

Posts

Elm Burl Vase (pics)

#1

Elm Burl Vase (pics)

Bill Grumbine (Kutztown PA)

>Greetings all

I have been trying to get this piece photographed for over a week now, and finally today I did it. I think having to get it delivered to its new owner had something to do with it. This is an elm burl which has been sitting around for a few years now, and judging by its condition, almost sat too long. It was one of my instant gallery pieces in Albany.


This wood came from a tree about two miles from my house. There is lots more on that tree, but this particular piece came off during a violent thunderstorm. When I stopped to ask the owner for some of the wood, I discovered that it was almost all burl! As you can see, it has some significant spalting going on in it. There were some places where it was downright punky, but I have dealt with punks before. Sharp tools were the order of the day, followed by a judicious application of the 80 grit gouge.


This is a shot of the other side, which shows the eyes better. This is a pretty good sized bowl, 10" high, and 10" across at the top as well. Wall thickness is approximately 3/8". It is finished with Watco Danish Oil and buffed with the Beall system.

If I may brag just a little bit, it was critiqued in the instant gallery by Stuart Batty and Andi Wolfe, and got very high marks. Stuart did suggest that the base could be just a bit smaller, and also suggested that I write my name smaller. That part will be a chore for me, since I have a rather large hand. But overall, they liked the finish, the consistent wall thickness, and no one seemed to see any of the mistakes I was sure they would find.

Thanks for taking a look.

Re: Elm Burl Vase (pics)

#2

Re: Elm Burl Vase (pics)

Sean Troy

>Besides the beautiful wood, the shape looks right on as does the finish. Nice job, even with big hands. LOL

Re: Elm Burl Vase (pics)

#3

Re: Elm Burl Vase (pics)

Thomas Skaggs, Foothills of Mount Level

>Bill,

Looks like you taught that punk a pretty good lesson! That wood was a great find and you did it justice!

Tommy

Re: Elm Burl Vase (pics)

#4

Re: Elm Burl Vase (pics)

RevDoug

>Very nice job my friend. Great looking wood. Great form. Looks like a solid package. Keep 'em coming.

Turn 'em round,

Re: Elm Burl Vase (pics)

#5

Re: Elm Burl Vase (pics)

Earl Eyre

>That 80 grit gouge is a wonderful tool. Fixes many problems. Nice job. I've done a lot of elm but never got a hold of any burl. It is beautiful.

Earl

Re: Elm Burl Vase (pics)

#6

Re: Elm Burl Vase (pics)

Jack Savona

>I was pleased to be able to see your work in person at the Symposium. I can't believe all the other beautiful pieces displayed there, a real inspiration for me to continue to 'stretch and reach'.

Re: Elm Burl Vase (pics)

#7

Re: Elm Burl Vase (pics)

Craig Daymon

>Beautiful Bill. That's a pretty vase from a great piece of wood.

For smaller signatures, Cindy Drozda uses a Dremel engraver (about $20 or less from the big box) typically used for marking electronic equipment and such. Since this really just scratches in the signature she then rubs black shoe polish in on light woods or gold stuff (I forget what) in for lighter woods. She's a bit smaller in stature than you, but when you consider that several of our group needed reading glasses to read some of the signatures I think even your big mits could get a pretty small signature.

Personally, I write like a second grader when writing on wood, so I picked one up to try and improve things.

-Craig

Re: Elm Burl Vase (pics)

#9

...correction...

Craig Daymon

>Oops, that gold stuff gets used on DARKER woods, not "lighter".

Re: Elm Burl Vase (pics)

#10

Re: Elm Burl Vase (pics)

Gerry in Maryland

>Nice one Bill,

In the bottom pic there is a swirl at the lower left quarter that looks like a leaf. Reminds me of a fossil in stone.Really cool..

Gerry

Re: Elm Burl Vase (pics)

#11

Brad Vietje

Nice, Bill !

Brad Vietje

>

Re: Elm Burl Vase (pics)

#12

Copy Cat! :>)

Dominic Greco in Richboro PA

>

Bill,

Congrat's on the Instant Gallery success!

I just took a look and called Dawn in to see this beautiful vase. She was standing behind me, looking over my shoulder at the computer. Her exact words were, "Hey! That looks like the bowl you made! Did Bill copy off of you?"

HAHHAAA! :>)

Now I'm fessing up. I told her that she had it backwards and that I mimic your style. I went on to say, "Yeah, you should recognize that form. Bill was the one who taught me!"

I gotta' say, I really love this form. And that burl is mighty cool looking. It's so light colored that it almost looks like ash burl as opposed to elm.

See ya around,

Dominic

Re: Elm Burl Vase (pics)

#13

Re: Elm Burl Vase (pics)

Bill Grumbine (Kutztown PA)

>Thanks for the comments everyone! I have been trying to get back to this thread for days, but computer time has been severely limited. I have been doing some substitute teaching at a local Christian high school this week, and I am being punished by God for the way I treated subs when I was a kid. ;-) I have some more stuff on the lathe that should prove interesting though. Stay tuned for the next installment.

Dominic, just tell Dawn that great minds think alike.

Bill