Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

How do you like your blanks?

Posts

How do you like your blanks?

#1

How do you like your blanks?

Gary Evans Tallassee, TN

>Hi all,

I'm cutting up some wood to take to a sale next weekend.

My question is this:

For those of you who buy wood. Do you prefer to buy dimensioned blanks and pay the processing costs? Or, do you prefer to buy round and half round sections for less money?

For those of you who don't buy wood, I'm sure I'm going to hear tales of "Free Wood." I have scavenged a lot of wood over the past few years and it has been my experience that there is no such thing as "Free Wood." There will be time, fuel, sweat and maybe a little blood invested in any wood that you take from the log to the lathe. If you figure your time at your normal hourly rate, you may find that the "Free Wood" wasn't exactly free. JMHO

Thanks,

Gary

Re: How do you like your blanks?

#2

I like mine...

Jay in TX

>FREE!!! Hey...you asked for it ;~)

Seriously though Gary... your true answer is the variance between the percieved responses you're going to get. Have some log sections, Have some halved logs (pith cut out), and some round "processed" blanks. Their is a huge difference between resources of people who frequent this board; is that standard going to be reflected at you sales venue? Not everyone has a chainsaw or bandsaw, and some may have a mismatch of equipment (say a PM 3520 and a small low-end electric chainsaw) and may being willing to purchase based on convenience or necessity. Heck, I'm just rambling now, so here's the advise I'll give for the compensation I'm receiving ;)

My preference would be dependent upon the condition and type of the material being offered. But overall, I'd seek halved log sections or sizable log cants. I have the equipment and could process them as I needed or wanted to use them.

Good luck, and may you sell every piece at the price you're comfortable with.

Re: How do you like your blanks?

#3

Re: I like mine...

JamieDonaldson

>medium rare, with no drippy stuff!!!

Re: How do you like your blanks?

#4

Re: I like mine...

Gary in Zirconia, NC

>I like mine halved just so I can see what I'm buying. Other wise I'd like it on the hoof (whole).

Re: How do you like your blanks?

#5

Re: How do you like your blanks?

JKJ in East TN

>Gary,

Even though I have saws, when I buy wood I prefer some processing instead of a round chunk of tree, at least cut through the pith. Although this limits the ways it can be used it makes it easier to see what the wood is like and is less likely to crack if it dries and shrinks a little before used.

If I did not have a chainsaw and good bandsaw, I'd want it slabbed with two parallel faces. That also makes it easier to examine, carry, and stack!

If you have the time, you might try taking some with various amounts of processing and see how they sell. I'm sure some people will prefer and pay extra for blanks slabbed, squared, or even cut into ready-to-use rounds, dipped in anchorseal and with a nice label indicating type of wood. Whether those people will show up at your event is another issue!

Have you ever tried selling squares for spindle turners? Or do most people stick to bowls?

BTW, if you need more wood to take I may cut up that other figured maple log this weekend and see if there's anything good inside. Also, I slabbed and squared some of those red maple crotches.

JKJ

Re: How do you like your blanks?

#6

Yes

John Trant (Baltimore/DC corridor)

>People that turn natural-edge bowls will need half or whole logs. Peole that don't will want all the "waste" trimed off to minimize shipping weight charges. A long time ago when I bought blanks, I preferred turning squares. I bought a few circles (again, with the idea of reducing the shiping of "waste" wood) but the sawyer never balanced the center with the grain.

Personally, I don't turn natural edge bowls so I use a chainsaw to prepare (and store) my bowl blanks as trapazoids (when looking at the end grain). When I am ready to turn, I convert them to "faceplate-oriented" circles or "hollow form" spindles on the bandsaw.

My suggestion, offer both half logs and prepared blanks, each priced appropriately, and let the turner decide what they want. Alternatively, you can advertise half-logs and offer the service of triming for a small fee. Personally I would just do the former and avoid the potential hassel of unreasonable customers' requests as to how to cut the log.

John

Re: How do you like your blanks?

#7

JL

Re: How do you like your blanks?

JL

>Slabbed - I don't really do natural edge.

Re: How do you like your blanks?

#8

Re: How do you like your blanks?

Jim King

>I have been watching this with interest. I have been thinking of producing bowl blanks rounded on the lathe and some even roughed out boiled and dried with enough left for the person to be creative. I would appreciate any thoughts on this.

Re: How do you like your blanks?

#9

Re: How do you like your blanks?

TomW in SouthJersey

>To answer Gary's first question. I buy wood sometimes and due to shipping would like the rounds. If not shipped I agree with others I would like to be able to see the grain in the center, so halved is my vote.

In response to Jim's question. I would shy away from the roughed bowls because I personally wouldn't feel as though I created the whole thing and wouldn't like the shape predetermined. Although since shipping costs are a considerable issue (I assume) for you I may very well be mistaken.

There's my $0.04 worth of response.

Tom

Re: How do you like your blanks?

#10

Re: How do you like your blanks?

Gary Evans Tallassee, TN

>Thanks for all the input, guys.

You've reinforced my thinking. I have been selling turning wood at the Southeastern regional sypmosiums for the past few years. I have always tried to take a mix of processed and unprocessed wood with me. I also usually have some spindle blanks, John. 8^]

My friend, who is having a big tool sale, has graciously offered to let me bring my wood and he will sell it for me and even deliver the surplus to the Statesville symposium on the 5th.

The reason for my question is that I am debating about taking the wood this weekend or waiting until the sale to take it to him. If I take it this weekend when SWMBO is going to be at a meeting, then I won't have enough time to cut dimensioned blanks. I would be taking a combination of split and whole log sections.

If I wait until next weekend, when SWMBO will be home, then I would have time to dimension and dress up the blanks.

Momma may not like me being away from home next weekend, but I'm thinking that taking the time to cut something for everybody is the best approach. Plus, if I go down for the sale, I'll be able to meet and talk with my customers, which is always the best part of selling turning wood for me. I have not found a better group of people than wood turners.

Gary

Re: How do you like your blanks?

#11

That's B-l-a-n-k-s, Jamie, not S-t-e-a-k-s! 8^]

Gary Evans Tallassee, TN

>