Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Segmented salad bowl question

Posts

Segmented salad bowl question

#1

Segmented salad bowl question

Tom In Red Deer

>Is it possible/prudent to make a segmented salad bowl? Will the salad oil interact with the glue in the joints?

It would be finished with food safe oil.

I have a customer that wants one and I'm not sure if I should do it or not.

Thanks for your help,

Tom in Red Deer

Re: Segmented salad bowl question

#2

Re: Segmented salad bowl question

Mark Kauder, Phenix City, AL

>Glue it with Gorilla Glue. Use rubber gloves. Once you have a ring clamped up, wipe it and your gloves down with Acetone, and then it all is not so messy.

Mark

Re: Segmented salad bowl question

#3

Re: Segmented salad bowl question

Brian Hahn in SW Wisconsin

>My popcorn bowl is a segmented cherry bowl made with yellow glue and finished with many coats of "salad bowl" finish. It has been in use for 15 years and hasn't always been cleaned in a timely fashion. I think it looks better now than when it was new -- it now has that "patina" that only age and use can give (i.e. dings, nicks and scratches).

Re: Segmented salad bowl question

#4

Re: Segmented salad bowl question

Russ Fairfield

>I have one that is glued up with Titebond-2 and has been in steady use for about 10 years.

Re: Segmented salad bowl question

#5

Re: Segmented salad bowl question

Tom in Red Deer

>Thank You for the replies,

Those are the answers I wanted to hear. I have used Gorilla Glue, Titebond II and III and Lee Valley Fish Glue. I like the Fish Glue the best but the others work just as wekk.

Thanks again

Tom In Red Deer