Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Finish for Boxwood???

Posts

Finish for Boxwood???

#1

Finish for Boxwood???

Danny Wells

>What kind of finish would be best for boxwood? I'm making one of my trumpet yelper turkey calls from a piece of beautiful boxwood for one of my customers. I'm putting in some really small beads and other detail, and I don't want the sharp valleys or creases between the beads to get filled with finish. The call would probably be used in the field and exposed to the weather. I would also like to preserve the color as close as possible.

I usually use Mylands Cellulose Sealer and then either a gel polyurethane or Hut's polish. The sealer gets down in those creases and is hard to get out.

I know that's a tall order. Any suggestions would be helpful.

Re: Finish for Boxwood???

#2

Re: Finish for Boxwood???

John Trant (Baltimore/DC corridor)

>The best finish would probably be a Danish oil (e.g., Watco) but it will change the color of the boxwood to a "warm" (but yellow) tone. Shellac and lacquer will not do well if the call gets wet. Perhaps a water-based poly. It will do little to the color of the wood and will provide great protection against the elements but you will need to need to take a bit of care during the application to keep the bead work clean.

John

Re: Finish for Boxwood???

#3

Re: Finish for Boxwood???

Danny Wells

>Thanks John,

I'll do some trials with the water base poly on a scrap that I have.

Thanks again,

Danny