Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

steady rest for Delta Midi lathe

Posts

steady rest for Delta Midi lathe

#1

steady rest for Delta Midi lathe

Mike Recchione

>I've been looking for a steady rest that would fit my Delta Midi lathe, mostly without success. There was one company in Arizona that made them and sold them through an eBay store, but the store's been closed and who knows what happened to the company. In any case, I've pretty much decided to make one based on the Dominic Greco model in the archives (scaled down).

The problem is the wheels. I'm choking on the notion of having to buy an eight pack of wheels and bearings for $30 to $50 when I only need three. I know, I know - a decent commercial spindle steady like the Oneway is over $100 (and doesn't fit my lathe), so I shouldn't worry about spending half that much to make one. But the idea of throwing away 5 perfectly new wheels and bearings bothers me. Garage sale season is ending around here, and I can't wait until spring, so I may wind up having to buy new.

Can anyone suggest an alternative? Or is there anyone who is planning to build a steady rest themselves and might be interested in sharing an eight pack?

- Mike

Re: steady rest for Delta Midi lathe

#2

Re: steady rest for Delta Midi lathe

Don Henthorn

>Go to a local Goodwill or Salvation army or other thrift shop and you will probably find a pair of in line skates or a skate board with some ususable wheels. Worth a try.

Re: steady rest for Delta Midi lathe

#3

Looks like I stutter in print.

Don Henthorn

>

Re: steady rest for Delta Midi lathe

#4

Re: steady rest for Delta Midi lathe

Gary Evans Tallassee, TN

>Hi Mike,

Try your local pawn shop. In-line skate wheels work well. You can resurface them on your lathe if they are rough.

Gary

Re: steady rest for Delta Midi lathe

#5

Re: steady rest for Delta Midi lathe

Jim Terry

>I recently went to a local indoor skating rink and purchased

three wheels. They usually carry replacement wheels for repairs.

Re: steady rest for Delta Midi lathe

#6

Re: the Oneway spindle steady will work

Danny Wells

>I use the Oneway spindle steady on my Jet mini and it works great. You might be limited on diameter, but by the time you put any spindle steady on a mini lathe, you're going to be limited on diameter.

The Oneway will be a lot more rigid and stout than anything you can build.

Danny

Re: steady rest for Delta Midi lathe

#7

Re: steady rest for Delta Midi lathe

John Lucas

>Mike I went to goodwill store and bought a set of skates for $2.50. John

Re: steady rest for Delta Midi lathe

#8

Check out Dominic's Article  *LINK*

Garrett in Victoria

>


Steady Rest

Re: steady rest for Delta Midi lathe

#9

Re: the Oneway spindle steady will work

JimQ

>You don't need to lose clearance, do a "J" shaped frame and then clamp it to the back of the bed instead of the top. It doesn't have to be a full circle if you use 3/4" plywood because you aren't putting much stress on it. I have been thinking of this for a couple of weeks, just haven't gotten around to building it. Hoping to get to it next week. When I do, I will put up pictures.

JimQ

Re: steady rest for Delta Midi lathe

#10

Oops - back to the drawing board

Mike Recchione

>Thanks for all the great responses. The issue with the Oneway was that I couldn't find a clamp block that would fit my lathe - there's only 1-1/4" between the ways. I suppose I could make a clamp block...

But diameter may be the real issue here. The smallest inline skate wheels I was able to find are about 2 1/2 inches in diameter, which with next to no clearance over the bed, would leave a little over 2" as the maximum diameter of the workpiece that could be accomodated. (The lathe has only a 10" swing). I'm getting ready to take an online recorder making class through the Musical Instrument Makers Forum (MIMF), and while the finished instrument will be 2" or less in diameter, I was hoping to start with something a little bigger while I worked on the bore and head joints. That's mostly what I want a steady rest for.

I may need to come up with a design that gives me more clearance. I've heard bad things about the steady rests that just use the metal bearings as rollers, but that may be the best way to go for what I need to do - it doesn't matter if they leave marks, since the outside of the instrument will be shaped between centers, after the bore is done.

As you might guess, I'm pretty long on theory and low on experience at this point. I really appreciate everyone's suggestions.

- Mike

(Who is beginning to wish he had held out for a bigger lathe).

Re: steady rest for Delta Midi lathe

#11

Re: the Oneway spindle steady will work

Phil Joines Krum, Texas

>Why not make the sides come down both the front and back? Use a cabinet clamp to secure it. Use a short piece of angle to contact the top of the bed to keep it vertical.

Re: steady rest for Delta Midi lathe

#12

Thanks, I did.

Mike Recchione

>

Re: steady rest for Delta Midi lathe

#13

Making Wheels

Phil Joines Krum, Texas

>You can make wheels using regular sealed bearings and turn and glue on plastic wheels. Don't use UHMW plastic, it can't be glued :>( I can't think of a source right now for the plastic but any fairly sort type should work.

Re: steady rest for Delta Midi lathe

#14

Good idea

Mike Recchione

>

Re: steady rest for Delta Midi lathe

#15

Re: steady rest for Delta Midi lathe

William Duffield, on the Cohansey

>Mike, I've got some extra worn rollerblade wheels, left over from the steady rest I built. I can mail them to you or bring them to the Nov. CJWA meeting, if you are going to be there. Only thing is you'll probably want to chuck them in your lathe and go at them with a ROS to shape the tires a bit,, and also reduce the diameter, like I did.

If you want, I can also bring the steadyrest I designed and built, quite different from Dom's, for you to study. It's a "bit" oversized for a midi, but illustrates some useful concepts. We use it on a 10' between centers bedpole lathe and also on my JET 1236.

Re: steady rest for Delta Midi lathe

#16

Re: steady rest for Delta Midi lathe

Mark Kauder, Phenix City, AL

>Here is what I did for my Jet Mini. Works great. You can do the same with 3 wheels. Note that I used a thin piece of steal for the bottom, so that I would not lose much swing.

Also note: this picture was made at the end of the building phase - before I Sloted the arms and secured them with bolts and knobs.

Mark


img

Re: steady rest for Delta Midi lathe

#17

Re: steady rest for Delta Midi lathe

Mark Kauder, Phenix City, AL

>P.S. I got my wheels from a brand new set of skates that I was able to buy at Target for $10. I was able to share the extra wheels with another turner make a steady (Andi Wolfe).

Mark

Re: steady rest for Delta Midi lathe

#18

Duh! *LINK*

Mike Recchione

>This just proves that I shouldn't try to use my brain after midnight! I mixed up radius and diameter last night. Even with the most simplistic design, i.e. where the wheels only move vertically and not on a angle, I could use 3" wheels and still have clearance for a 4" diameter workpiece - more than big enough for what I want to do. A different design could give virtually no loss of clearance on the lathe.

Here's a link to a simple design - I might modify this one to start with. If I need to work on bigger stuff, I can make a fancier one.


simple steady rest

Re: steady rest for Delta Midi lathe

#19

Nice!

Mike Recchione

>

Re: steady rest for Delta Midi lathe

#20

Thanks, Bill

Mike Recchione

>I rarely can make it to the CJWA meetings anymore - I almost never get done at work in time to make the drive, and Wednesday nights are often bad because that's also the night my wife's PTO meetings are usually held. I really appreciate your offer to pack them up and send them. I'm going to try Target (as suggested) and Goodwill and also ping some friends with growing kids to see if I can find a cheap source of wheels locally. If I can't, I'll take you up on your generous offer. I'd really like to see the one you made - do you have pictures?

Thanks again,

- Mike

Re: steady rest for Delta Midi lathe

#21

Re: Thanks, Bill

Ed Karch in No.VA

>Picked up a pair of childs scates at walmart for $10 =8 wheels.

Re: steady rest for Delta Midi lathe

#22

Re: Thanks, Bill

William Duffield, on the Cohansey

>I don't seem to have any pictures of the steadyrest, just some drawings in an application that is not playing nicely with my new printer. I will have to take some photos, and will post them when I've processed them. I can drop these in a priority mail box and have them to you in a couple of days, and it'll keep you out of the WalMart. I wouldn't wish that experience on anyone:^) Just e-mail me your snail mail address.

Re: steady rest for Delta Midi lathe

#23

Re: Duh!

William Duffield, on the Cohansey

>Mike, as I noted below, I will post photos of mine. I used Herman's design as inspiration for mine, but made some modifications to provide more clearance between the turning and the bed. The photos will explain.

Re: steady rest for Delta Midi lathe

#24

Re: Wheels?

William Duffield, on the Cohansey

>Forget what I said, and offered, regarding the used rollerblade wheels!

You don't want them! Especially, you don't want to grind them down to a smaller diameter, like I did. They are hollow, and a blowout (which happened on mine, while someone else was using it) is really, really ugly. We replaced the roller blade wheels with smaller diameter skate board wheels with sealed ball bearings. It works a lot nicer now. You need to look for some skate board wheels.

Photos of our now well used steady rest, with some field enhancements, will follow a bit later. I might even get a shot of the failed wheels, for your amusement.

Re: steady rest for Delta Midi lathe

#25

Re: Wheels?

Mike Recchione

>OK, Bill. Thanks for offering, anyway. I'm going to try the thrift store route, or Target. I could kick myself - I saw a pair for sale at a flea market on Sunday, but that was before I knew I needed them. Oh well. Patience is a virtue, they say :-)