Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Stupid Chuck question

Posts

Stupid Chuck question

#1

Stupid Chuck question

Barry Irby

>My Nova chuck (the one with the stupid key) has become stiff. I used to be able to twirl the key with ease. What's the fix? Take it apart and maybe blow it out? I would not think you would want to lube it as the lube would attract dust. Is there a truly dry lube?

Re: Stupid Chuck question

#2

Re: Stupid Chuck question

Don Henthorn

>I use powdered graphite in cases like that.

Re: Stupid Chuck question

#3

Re: Stupid Chuck question

Duane C.Leach

>Barry.. The only stupid question is one not asked.

On some chuck models a set screw is used to make the action stiff so it won't vibrate loose.

If that is not the case your chuck just might need cleaning out. Take it apart and clean it.

Happy turning.

Duane Leach

Re: Stupid Chuck question

#4

FWIW...

Peter Teubel

>When my chucks get sticky, I blow it out with compressed air, spray it down liberally (i.e. really soak it) with WD40, and blow it out again. A bit messy, but they're like new again...

Re: Stupid Chuck question

#5

Thanks Everybody!

Barry Irby

>

Re: Stupid Chuck question

#6

Re: Stupid Chuck question

Carole in VA

>Barry, Teknatool had instructions for disassembly and maintainence on their site. Don't know which chuck you have, but on my Supernova2 they say to use and all purpose grease.

Re: Stupid Chuck question

#7

Re: FWIW...

The Wood Spinner / Bill Hale

>I do the same. After wipe down turn on the lathe to high speed and spinn out any excess prior to re use.

I do this about once a month sticky or not.

Good turning and be safe

Bill in Casa Grande, AZ.

Re: Stupid Chuck question

#8

Re: Stupid Chuck question

Scott Hogsten

>No stupid questions :-) I've taken all of mine apart at one time or another and given them a good cleaning. One thing I have noticed is that the big lock ring that holds everything together will develop burrs and causing the action of the chuck to be very stiff. A few seconds with a stone will really improve the action of the chuck. Note this probably voids all warrantees, causing global warming, all of your hair to fall out, and a multitude of other problems so do it at your own risk

Scott

Re: Stupid Chuck question

#9

Dick Hines

Re: Stupid Chuck question

Dick Hines

>Barry if you take the jaw slide off the chuck body be careful putting them back on. They only go one way, in order 1-4. They will not close properly if not put back this way.

Oh, forgot to tell you about the travel stop screw in slide #1. I have 2 Super Novas, one had the screw and one did not.