Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Nova Mercury Lathe

Posts

Nova Mercury Lathe

#1

Nova Mercury Lathe

Ed Heuslein

>A friend has a Mercury lathe with a bad motor. We are going to replace it with one of the treadmill motors. However, we are going to need a longer belt. Anybody have some info on where we can get a longer belt that will fit the pully on this lathe? Thanks.

Re: Nova Mercury Lathe

#2

Re: Nova Mercury Lathe

JimQ

>After you know exactly how long you need, go to an auto parts store with the old one for matching the width.

JimQ

Re: Nova Mercury Lathe

#3

Re: Nova Mercury Lathe

John Lucas

>Ed all I could find locally when I needed one for my Nova Comet was a 6 band belt. My lathe uses a 3 band so I simply split the big one with a razor blade. Then I had 2.

Re: Nova Mercury Lathe

#4

Re: Nova Mercury Lathe *LINK*

Fred in NC

>If it is a SERPENTINE belt, that has ribs, try Aarubco Rubber Co.


Aarubco Rubber Company