Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

White Oak Burl

Posts

White Oak Burl

#1

White Oak Burl

Barbara Gill, Remlik VA

>I took the long way back from Jacksonville FL so I could pick up a burl from my sister and brother-in-law in Gainesville GA. That burl had been calling me for about 3 years; it was cut down several months ago. After we cut off the first piece I realized the wood looked like nothing I had ever seen before plus it was extremely heavy, much more than oak is usually. The dark color would bleed out into the Anchorseal as each piece was coated. There wasn't the same figure as I am used to seeing with burl. I was convinced that it wasn't white oak until the next day when the sour oak smell that was not present when we were cutting filled the whole area around the truck.

I rough turned a bowl today. The wood is heavier and harder than any I have ever handled. Has anyone ever seen this pattern in white oak before?


img

Re: White Oak Burl

#2

Second Shot 

Barbara Gill, Remlik VA

>


img

Re: White Oak Burl

#3

Brad Vietje

No - But it sure looks wild !

Brad Vietje

>

Re: White Oak Burl

#4

Re: White Oak Burl

John Lucas

>Barbara That's a cool piece of wood. There are a whole bunch of variety's of oak. My friend who worked for TVA said that in the woods there are 6 or 8 varietys. When they get to the truck they are down to 4 and by the time they get to the mill they call it all Red Oak and White Oak.

Re: White Oak Burl

#5

Re: White Oak Burl

Carole in VA

>Barb, was this tree alive and healthy when it was cut? Sure doesn't look like any VA white oak I have ever seen. Of course I guess most burls are the direct or indirect result of injury or disease.

Re: White Oak Burl

#6

Looks marblized

Kevin Turner

>

Re: White Oak Burl

#7

Re: White Oak Burl

Barbara Gill, Remlik VA

>Yes, it was alive and I assume healthy. It happened to be in the way of a garage.

Re: White Oak Burl

#8

Yes Barb, I have seen this...

TDaniel

>and it will crack like no other wood you have ever turned. Even with Anchorseal it will crack. You just can't be careful enough in drying this wood. I lost most of the pieces that I tried to turn from it. I gave a piece of it to a club member who soaked it in detergent and his did not crack. Good luck with it.

TD

Re: White Oak Burl

#9

Re: Yes Barb, I have seen this...

Barbara Gill, Remlik VA

>I was hoping you had since it came from close to you. I was afraid it might crack. Have you ever tried boiling?

Re: White Oak Burl

#10

Re: Yes Barb, I have seen this...

TDaniel

>I have not boiled but I think this would be a prime candidate for boiling. Unfortuanately though, the wood isn't all that pretty.

TD