Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Velcro replacement

Posts

Velcro replacement

#1

Velcro replacement

Doug

>I recently saw a reference - I think on this forum - to replacing the hook and loop part on my disk pads. After a while they become hard and the sanding disk will no longer stick. There was a reference to a site where you could buy the hard part like they use on drum sanders. Does anyone remember the site?

Re: Velcro replacement

#2

Re: Velcro replacement

Carole in VA

>Doug, I just saw that discussion on WoW, so that's probably where you read it too. Check back there for several sources.

Re: Velcro replacement

#3

Re: Velcro replacement

Doug

>Thanks Carole - your right is was on WOW.

Re: Velcro replacement

#4

Re: Velcro replacement

Wayne Leach

>Hi Carole,

How does one subscribe to or become a member of WOW???

Thanks, Wayne

Re: Velcro replacement

#5

Check your email

Carole in VA

>

Re: Velcro replacement

#6

Re: Velcro replacement

Les Robison

>If you are refering to the H&L on the pad of your sander, you can buy these from Craft Supply.

Re: Velcro replacement

#7

Re: Velcro replacement

Barry Irby

>On one of the sandpaper sites I saw a reference to a kit that converted Pressure Sensitive Disks to Hook and Loop disks. Wonder if this would be a good way to do it from the beginning? Buy PSA disks and convert them. Then when the H&L part failed you could peal it off and apply another.

Re: Velcro replacement

#8

Re: Velcro replacement

Phil Lieberman

>The Wow site is something i wanted to check out, but cant!

Re: Velcro replacement

#9

Re: Velcro replacement

Don Henthorn

>Woodworkers Supply has kits for replacing the hooks on sanding pads.

Re: Velcro replacement

#10

Re: Velcro replacement

The Wood Spinner / Bill Hale

>Hi Carol

I too would also like to get on WOW.

Please

Bill

Re: Velcro replacement

#11

Re: Velcro replacement

Bruce in Saint John, N.B. Canada

>Lee Valley sell replacement pads for the disc sander mandrels 2" & 3" diameter, I have used them with great luck. Not as expensive as having to purchase new mandrels.

Bruce in Saint John, N.B.