Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

I Need Help--

Posts

I Need Help--

#1

I Need Help--

Ken Oakley-Sunny St. Cloud, Fla.

>I have access to some really great,highly figured Spalted and non spalted camphor and citrus wood. Both types are not very suitable for cutting flatboard lumber as the trees and branches curve so much.

I have been cutting most of it into pen blanks, 13/16" X 13/16" X 6" and selling on Ebay. I wind up with a lot of pieces shorter then 6" and thought maybe I could list the shorts as stooper,(bottle), blanks.

What is considered a good H W D dimension for stopper blanks? I sometimes also get small blocks maybe 3"X4"X4" approx. Would Turners buy these blocks for bowls etc. I can get some blanks larger but citrus is a very dense heavy wood and I am afraid the shipping will scare people away from bidding.

Re: I Need Help--

#2

Re: I Need Help--

JKJ in East TN

>Ken,

3x3 and 4x4 is a good size for things like small boxes, but 3" is a little too short. I prefer pieces around 6" long (with the grain running down this length). You need a bit of extra at the ends to grip with a chuck. I don't know about bottle stoppers.

BTW, I make a lot of finger tops with pieces 1" to 1.5" square, but again, prefer 6" long blanks so I can turn several in succession. (These go with missionaries to orphanages and such.)

Do you know about the US postal services fixed rate boxes? $7.50 for anything you can fit into the box regardless of weight. I've seen two different sizes. I received one of these the other day containing a large piece of bloodwood that was extremely heavy!

JKJ

Re: I Need Help--

#3

Re: I Need Help--

Ken Oakley-Sunny St. Cloud, Fla.

>Yes, I know about the $7.70 Flat Rate box at the USPS. In fact I sent Ellis some samples of the wood using that box.

I am afraid I don't know what those finger thingies you mentioned are.

There has to be some use for these shorts because they are too pretty to dump in the trash. Thanks for your reply.--Ken

Re: I Need Help--

#4

Re: I Need Help--

joaz

>Hi, I am always looking for stock to make cups for goblets. These should be at least 3" dia. by 4" long. Let me know. These have to be dry or close to it. Thanks, Joaz

Re: I Need Help--

#5

Re: I Need Help--

Bob R

>HI Ken

3x4 is a min. size for real small turnings. I would be interested if they are at least that size.

Please E Mail

Bob R

West Mac Turning