Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Where to get bowl turning blanks?

Posts

Where to get bowl turning blanks?

#1

Where to get bowl turning blanks?

Guy in Cuba

>Where can I get a box of small bowl blanks? I would need them mailed to me using the US Postal Service.

I am new to turning and just set up a lathe my father had left in the box for many years. I bought two spalted maple blanks off of eBay and liked the resulting bowls very much. Rather than order a blank here and there, I would like to find a source for a box of wood blanks that is reasonably priced and will mail to my location at the Naval Station Guantanamo Bay, Cuba, via the US Postal Service and military Fleet Post Office. I am not particular as to the type of wood, prefering nice, but not expensive blanks. As I get started, I prefer a blank size that is 3" thick and about 5 to 6" in diameter.

Thank-you for any advice you can provide.

Guy Belleman

Teacher, W.T. Sampson Unit School

PSC 1005 Box 49

FPO AE 09593

Re: Where to get bowl turning blanks?

#2

Re: Where to get bowl turning blanks?

Gary Evans Tallassee, TN

>Hi Guy,

I have several different species that I could sell you at a reasonable price. Probably $5 to $10 ea, depending on species and figuring for 3"x6"x6". Not sure how expensive postage will be, though. I can cut them round for you to save a little on the shipping cost.

Send me an e-mail, and I'll give you a list of what I have on hand.

Gary Evans

Talasi Hardwoods

Re: Where to get bowl turning blanks?

#3

Re: Where to get bowl turning blanks?

Ron in Drums PA

>I've never been to Cuba, but I bet there are trees growing by you some where. Why not harvest some for turning? I hear Cuban Mahogany is a wonderful wood.

Re: Where to get bowl turning blanks?

#4

Re: Where to get bowl turning blanks?

JamieDonaldson

>From my Army experience you should be able to "liberate" some good turning wood locally, and especially around a Navy base. Look for pallets, structural bracing, planks, even driftwood- there should be readily available hardwoods from local sources without having to pay shipping? And somewhere around base shops you should be able to find a bandsaw that you can borrow time on for a few cold brews!

Re: Where to get bowl turning blanks?

#5

No access to local wood

Guy in Cuba

>The base gate is closed, so there is no access to the wood just a few miles away. :-(

Guy

Re: Where to get bowl turning blanks?

#6

Wood needing liberation

Guy in Cuba

>Not much wood needing liberation here on base. I always have my eyes looking around for opportunities. Almost everything available is pressure treated or 3/4 inch pallet wood. Any wood that sits for even a short time is quickly eaten by termites.

Re: Where to get bowl turning blanks?

#7

Lets help out !

The Wood Spinner / Bill Hale

>Guy

My never having been in the service is the address all I need to send some wood ?

What size lathe ? What size would you like.

Hey guys and gals I think some of us could send a piece or two to this fellow for nothing. Remember he is there for us. If it were not for people like him we may not have the fredom to do our turning.

Re: Where to get bowl turning blanks?

#8

Incoming

Jim Shaver - Oakville, Ontario

>I'll mail you something from Canada, using the address you posted

Thank You for your service,

take care,

Jim

Re: Where to get bowl turning blanks?

#9

Hey Guy

CapeMayMike

>Watch your mail, you'll get some wood from here in south Jersey.......

Re: Where to get bowl turning blanks?

#10

Re: Where to get bowl turning blanks?

kenny in indep

>Anybody know if USPS flat rate box can be mailed to Guy, I have gotten wood mailed this way, $7.70 seems like a little way to say thanks for your service.

Re: Where to get bowl turning blanks?

#11

Should work...

Jay in TX

>APOs should work just like any other mailbox here in the Lower 48. If I can ship a big box of goodies to my buds in Iraq/afghanistan (or the other 'stans) for less than $20, then wood to Cuba should work in the flat rate boxes.

Re: Where to get bowl turning blanks?

#12

Re: Where to get bowl turning blanks?

The Wood Spinner / Bill Hale

>Thanks all for joining in.

Bill

Re: Where to get bowl turning blanks?

#13

Thanks Bill

Guy in Cuba

>Bill,

I have a 12 inch lathe, but I am turning pens and small bowls in the 5 inch diameter by 3 inch thick size.

The shop teacher is looking on with a lot of interest. He is of the new technology software training and not much hands-on.

I am enjoying myself. Yes, any package can just be sent to the following address using the U.S. Postal Service. A customs label will have to be filled out. I suggest just saying the item is a bowl, at least that is our vision of what a piece of wood could be.

Within limits, of course, I will gratefully reimburse any mailing and packaging charges.

Thank-you,

Guy Belleman

PSC 1005 Box 49

FPO AE 09593

Re: Where to get bowl turning blanks?

#14

I wish I could shake all of your hands

Guy in Cuba

>What a great group. I did not expect this kind of response. A big thank-you to all. Several of you emailed me directly. Those that are action oriented and just sent something, I thank-you and will be in contact when your "care package" arrives.

This comraderie is great. What a great week. I promise to post pictures of the products of your gracious donations.

Thank-you,

Guy