Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

More Accuracy Again... *LINK*

Posts

More Accuracy Again... *LINK*

#1

Brad Vietje

More Accuracy Again... *LINK*

Brad Vietje

>Hi Folks,

A few days ago RJ posted a question about developing more accuracy in duplicating small finials for his clocks. I jumped in late, with a wordy suggestion of a no-caliper method that uses carefully drawn templates, so I'm re-starting the thread here with better info to pass on. This method was demonstrated to me by DJ DeLorie, of southern New Hampshire. DJ is a computer guy, so he draws out his templates using the computer, which does help him get two plots or printouts exactly the same.

I take no credit for this slick method, but I've tried it, and I've looked at a templete pair that DJ made up at a turning meeting, and I think it could be very helpful. See the link below...

Safe Spinning,

Brad Vietje

Thetford, VT


DJ's Parallax Spindle Jig

Re: More Accuracy Again... *LINK*

#2

Good grief !!

Fred in NC

>Very ingenious setup !! Of course, it takes time to make the jig, and the templates... and then, to cut the spindles by hand to match. The results very obviously excellent as evidenced by the pics of the bathroom vanity.