Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

carved red malle burl

Posts

carved red malle burl

#1

carved red malle burl

Sascha

>turned on the lathe and then carved with various carving tool, mostly electric and air powered, then sanded by hand.

finish is 24hour bath in watco, then 5 coats of wipe on poly.

I am having fun, just have to get used totaking pics with my new lights.

the pics are taken in my new photo tent, still need to play with it some more to get the best results.

Sascha


img

Re: carved red malle burl

#2

another view 

Sascha

>


img

Re: carved red malle burl

#3

and another one 

Sascha

>


img

Re: carved red malle burl

#4

JL

Re: and another one - All stunning

JL

>Don't know which pic I like the best. Beautiful piece!

Re: carved red malle burl

#5

and another one

Terry Quiram, Roanoke Illinois

>Sascha

Thats a real beauty. The burl is great and the bowl is wonderful.

Terry

Re: carved red malle burl

#6

Re: and another one

Jim Shaver - Oakville, Ontario

>Very Nice Sascha!

Take care,

Jim

Re: carved red malle burl

#7

Double WOW!!!

Jorge Castaneda

>Very nice work!

Thanks for sharing

Jorge

Re: carved red malle burl

#8

Fantastic!

Thomas Skaggs, Foothills of Mount Level

>That is one of the coolest things I have seen for a while here. I am impressed with the level of work on the underside.

The sculptural beauty of that piece is terrific. I REALLY like it!

Tommy

Re: carved red malle burl

#9

Beautiful! My first thougt was it was a....

Dagny

>Hurricane.

Re: carved red malle burl

#10

Re: carved red malle burl

Jennifer@Indy.USA

>Beautiful piece Sascha! Stunning! The carving is fantastic. When I have a juicy piece of wood like this I'm usually too afraid to carve it up, but you've really brought a neat dimension to this one.

Jennifer

Re: carved red malle burl

#11

Ooooooooo, that's a beaut!

Molly Winton

>

Re: carved red malle burl

#12

Re: carved red malle burl

Ed Kelle

>That is fantastic! Great work

Re: carved red malle burl

#13

Okay.....how???

KurtK in Indy

>Sascha...that is one beautiful bowl!! Now you gotta tell me how you carved the flutes. I really want to try that. I saw your post last night on the photo tent...I have one on its way today!! Thanks for all of the info and again...just magnificent!!

Kurt

Re: carved red malle burl

#14

Re: carved red malle burl

Michael Stafford

>Wonderful! Beautiful!

Re: carved red malle burl

#15

Re: Okay.....how???

Sascha

>it's mostly done with a die grinder and a 1" ball mill. then I also used a smaller teardrop ball mill and a proxxon reciprocating carver.

then lots of sand paper.

sascha

Re: carved red malle burl

#16

Wow!

Carole in VA

>

Re: carved red malle burl

#17

You know what this means Kurt....

Jennifer@Indy.USA

>Cha-ching!

Power carver and a reciprocating hand piece!

; )

I'm so evil!

Re: carved red malle burl

#18

Re: carved red malle burl

Bill Grumbine (Kutztown PA)

>Beautiful work Sascha! However, if you started with powersanding first, you could get all those ridges out of the top a little more easily! ;-)

Bill

Re: carved red malle burl

#19

Re: carved red malle burl

Sascha

>for that, i actually built a special jig to run it through my planer,hehehehe.

Re: carved red malle burl

#20

You nasty girl...

KurtK in Indy

>You knew all along didn't you?? Hmmmmm...Is that Wecher?? carver that you have what he's talking about?? Is it big enough? Have enough torque? Ohhhh.....I've got to stop spending money on these new things...BTW, I've been reading the pyrography threads with great interest....

I'm dead meat....

Re: carved red malle burl

#21

Burrows

Jorge Castaneda~Downeast Maine

>Jen,

Where to get burrows for the Wecheer?

I am looking for a little carbide wheel...

and whatever else I can't remember now.

Thanks

Jorge

Re: carved red malle burl

#22

Re: You know what this means Kurt....

Jill

>WOW Sacha!!! I love that wood and your design!!! OK I gotta know what power carver do all you wonderful folks use. Pros/cons? I have looked and can't decide, need some experience to help me out. I am in sooooooo much trouble. I am anxiously awaiting UPS today...more turning tools since the SWAT conference. I am doomed......help!!!! The lathe has me and it will not let go...around and around I go!!!

Re: carved red malle burl

#23

Just trying to help :) *LINK*

Jennifer@Indy.USA

>The Weecher has plenty of power yes.

Here let me help you out okay :)


img

SPEND MORE!

Re: carved red malle burl

#24

UmmHmm...another victim...

KurtK in Indy

>

Re: carved red malle burl

#25

Re: UmmHmm...another victim...

Jill

>Yep Kurt I am going to have to start attending tools buyers therapy. I am sooo excited about turning. I got three new gouges today and wow what to do next............I would send a picture of my first turnings, but I have to figure out how to get in in the text message.