Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Texturing Tool

Posts

Texturing Tool

#1

Texturing Tool

Ben Aragon

>Texturing Tool

I saw a texturing tool and I can’t find the site anymore. It looked like it was pneumatic and had 5 rods that stuck out of one end. I think when you press the trigger the ends of the 5 rods randomly strike the wood and leave dents. Has anyone seen this and can you tell were to look for it? Also has anyone used it and how do you like it?

Best Regards,

Ben

Re: Texturing Tool

#2

Re: Texturing Tool

theeviltwinn

>That tool is called a needle scaler. Welders use them so any welding supply house should carry them. I can't think of any brands right now.

I saw Bob Rosand use his. Looks pretty cool.

Mike

Re: Texturing Tool

#3

Re: Texturing Tool

Mike Brazeau

>Bob Rosand has an article on this topic in the Summer issue of Woodturning. He uses one made by Sioux Tools which has 12 needles. As is the case in all of Bob's articles, it is well written with lots of good tips.

Mike

Re: Texturing Tool

#4

Re: Texturing Tool *LINK*

Ed Moore

>Northern Tool has needle scalers on sale for $39.99.

Remember, you must remove each needle and round the business end on a grinder.

Ed


Northern Tool needle scalers

Re: Texturing Tool

#5

Re: Texturing Tool

RevDoug

>Harbor Freight also carries needle scalers. You can get their needle scaler atatchment that goes on an inexpesive air hammer. I think mine was less than $30 all together.

Turn 'em round,