Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

DC & Philly wood sources

Posts

DC & Philly wood sources

#1

DC & Philly wood sources

Dennis Yoder

>We will be traveling to SE Pa the end of the month with a stopover in DC. We will be visiting one of her sisters and participating in the "Walk to D'Feet ALS". Her other sister has been fighting this killer for an unheard 10 years. I would like to find some burl or figured wood. Besides Gathersburg, What would be your recommendations in DC and the Philly area? Thanks Dennis

Re: DC & Philly wood sources

#2

Re: DC & Philly wood sources

Ed Moore

>At the southwest corner of BWI airport near Baltimore there used to be a great place for wood - World of Hardwoods. It is tucked behind an 84 Lumber.

Near Annapolis, behind the Antiques Mall on Route 50 east just before the Bay Bridge is Exotic Lumber. Bill West is the importer. They also have a Baltimore and a DC location. The number is 410-267-0887.

Exotic Lumber would be my first choice.

Ed

Re: DC & Philly wood sources

#3

Re: DC & Philly wood sources

Michael Stadulis, in Gloucester County, NJ

>Hi Dennis,

I'd plan on Hearne hardwood in Oxford, PA off of Rt 1 a bit north of the Maryland border.

Mike

Re: DC & Philly wood sources

#4

Re: DC & Philly wood sources

William Duffield, on the Cohansey

>In the DC area, I have purchased from Vienna Hardwoods, in Vienna VA (but they have a limited supply of turning stock), and from Colonial Hardwoods, on the south side of Springfield. If you can't find Colonial, ask for a map at the WoodCraft in Springfield. Of course, WoodCraft also carries turning stock, but you probably already know about that.

How are you getting from DC to Phily? If you are driving, when you cross the Susquehanna, turn left and go out to Groff and Groff (about 35 miles from I-95, but it's a nice drive, especially with the autumn colors). If they don't have what you need, continue on to Hearn's Hardwoods. They are just off of U.S. 1 in Oxford, PA. You will find what you want at Hearn's, and they are not as far out of your way as Groff and Groff.

For addresses, driving instructions, stock, etc., just ask WoodFinder.

Re: DC & Philly wood sources

#5

Re: DC & Philly wood sources

CapeMayMike

>Kinda' hard to think about wood and such when you talk about ALS and such afflictions. Try here:Good place:http://www.hearnehardwoods.com/

Best,

Mike

Re: DC & Philly wood sources

#6

Here's the link *LINK*

CapeMayMike

>Sorry:


Hearne

Re: DC & Philly wood sources

#7

Re: DC & Philly wood sources

Gerry in Maryland

>Dennis,

As others have suggested try Hearne Hardwoods.

Rick Hearne had a whole room full of Cherry Burl the last time I was up to his sawmill. (About a month ago) He's about 30 minutes North from I-95.

Gerry